Your Search: "TRP"

Can be used to provide extra clearance between brake caliper and spokes. Spacer should be placed between rotor and hub.

- Converts 140 post mount to 160 or 160 post mount to 180mm - Simplified and lower profile design allows for the use of only 2 bolts instead of 4 - Compatible with all TRP and Tektro disc caliper 160, 180, and 203 rotor sizes

- For all TRP and Tektro hydraulic braking systems - Non-corrosive mineral oil - Increased Boiling point to 270 degrees C - Decreased viscosity for better fluid flow

The Dura Type insert pad was originally developed as an aftermarket upgrade for high end Shimano brake systems. The Kool-Stop Dura pads are the same spec as Shimano pads and fit Shimano, SRAM, TRP and Tektro holders with a set screw. Compounds: - Black: Kool-Stop's standard compound which is great for all weather conditions, but designed for dry condition riding. - Ceramic: This compound was designed for ceramic coated rims and is great in all weather conditions. - Salmon: Kool-Stop's most famous Salmon compound is also one of the most aggressive compounds for extreme all weather conditions especially in the wet, but still superb in the dry. - Carbon: Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Dual: A fusion of Kool-Stop's two finest compounds which will give superb braking in all weather conditions. This combination produces a more controlled smooth stop! Features: - Patented Plow Tip - Water Grooves - Rim Friendly Compounds - Fits 55mm length holders

Protection where it's needed; Tube Tops can be placed virtually anywhere cable housing comes into contact with a bicycle frame. Designed to protect a frames finish Tube Tops can also be used to quiet cable slap.

Park's Tire and Tube Repair Kit is a riding essential. It features Park’s glueless Super Patch Kit and strong nylon Tire Levers for quick and easy flat repairs. The kit comes with 3 levers, 6 patches in a small container, and a piece of sandpaper (for roughing the tube to prepare it for patching).

Integrated Mountain bike shifter adapters for TRP brakes are now available for Shimano I-Spec B, I-Spec II, and SRAM MatchMaker. Adapters will mount your shifter or dropper lever directly to your TRP brakes to keep your cockpit nice and tidy.

Integrated Mountain bike shifter adapters for TRP brakes are now available for Shimano I-Spec B, I-Spec II, and SRAM MatchMaker. Adapters will mount your shifter or dropper lever directly to your TRP brakes to keep your cockpit nice and tidy.

Dynaplug tubeless tire repair plugs are constructed from viscoelastic rubber impregnated cord and non-abrasive brass tip. The plugs are specially designed to be inserted directly into a puncture after object has been removed. - Pack of 5 replacement plugs with pointed brass soft nose tip - Compatible with all Dynaplug repair tools, except for Air Road tool - Made in USA

- Replacement hoods for your Hylex levers. - Color: Black or Gum - Comes in a set of left and right

Frame Taps will become a lifesaver at some time for virtually every mechanic. As with all Park Tool Taps, these are made of high carbon steel and are precision ground. Park Tool Frame Taps cut easily and fit conventional tap handles. For water bottle, toe clip, fender and rack bosses. The TAP-8 is 5mm x 0.8 for use with water bottle, toe clip, fender and rack bosses.

Frame Taps will become a lifesaver at some time for virtually every mechanic. As with all Park Tool Taps, these are made of high carbon steel and are precision ground. Park Tool Frame Taps cut easily and fit conventional tap handles. The TAP-9 is 6mm x 1mm for cantilever brakes and large fender bosses.

Adapters to convert your flat mount fork to post mount calipers - FF-1 front 140mm rotor - FF-2 front 160mm rotor - FR-1 rear 140mm rotor - FR-2 rear 160mm rotor - Each includes two bolts

Flat mount front adapter for both 140mm or 160mm rotors. All mounting hardware included in package.

- For hydraulic braking systems - Non-corrosive mineral oil - Excellent heat managment properties - Volumes : 50ml or 1000ml

Flat mount rear adapter for a 160mm rotor

Replacement top caps for various RockShox suspension forks.

Replacement top caps for various RockShox suspension forks. -32mm steel upper tubes only

Add a little color to your bike with these finely machined headset top caps. These caps are for 1 1/8? headsets and they will work on all headsets with tapered headtubes.

Add a little color to your bike with these finely machined headset top caps. These caps are for 1 1/8? headsets and they will work on all headsets with tapered headtubes.

Bicycle frame top-tube mounted storage pack mounts behind the stem. Nylon construction with mesh flap cover. Padded sides help maintain shape no matter the contents. Available in two size options. TECH SPECS - Size: Small: 75mm x 40mm x 105mm (220cm3) or Large: 150mm x 50mm x 90mm (386cm3) - Color: Red, Grey - Weight: Small: 15g, Large: 30g

Zipp's Stem Top Cap and Bolt are designed to work specifically with Zipp stems. The eight-gram aluminum cap and nine-gram-bolt are the same as those used on bikes built for Zipp-sponsored professional teams. The bolt has a T25 Torx head for ease of adjustment and so you need only one tool for your Zipp cockpit.

An extremely nice looking full aluminum headset topcap made in one piece. Laser engraved and then black anodized for a classy black in black matte/shiny finish. - Weight: Feathery 5g

Service your TRP brakes like a pro with our new Bleed Funnel. COMPATIBILITY CHART BRAKE MODEL COMPATIBILITY QUADIEM SERIES YES TRAIL SERIES YES SLATE SERIES NO* HYLEX SERIES YES HY/RD SERIES YES HYDRO TT YES DASH SERIES NO After feedback from our pro Athletes (and their mechanics) we have developed the TRP bleed funnel to simplify the bleed process. Take your service to the next level. *Slate uses a smaller bleed fitting. Funnel can be used with a slate Bleed fitting adapter

Replacement parts for Zipp aerobars. Compatible With: - HB-VKAL-BS1-A1, HB-VKAL-BS1-A2, HB-VKAL-CLIP-A1, HB-VKAL-CLIP-B1, HB-VKAL-EXT-A1, HB-VKAL-EXT-A2

Replacement top caps for various RockShox suspension forks.

NEW: Please refer to our chart for the correct adapter size you need. Disc brake adaptors available for Shimano, SRAM, Hope, Hayes, Formula, etc. rotors CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup. The Post Mount standard is universal for front and rear brakes. Frames and forks that use the post-mount brake interface use a stock size varying from 160mm to 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter. To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size. If you’re using brakes with large calipers (Magura MT5/MT7, Hope Tech V4, Hayes Dominion A4, etc.), please also order a low profile (button head) bolt kit to ensure correct fitment. Our disc brake adapters do not come with mounting bolts but if needed, we have sets of 4 bolts available. Not currently compatible with TRP 203mm rotors.

NEW: Please refer to our table graphic in the images for the correct adapter size you need. CNC machined from 6061 T6511 aluminum. Machined surfaces allow for better caliper alignment and a more rigid brake setup. The Post Mount standard is universal for front and rear brakes. Frames and forks that use the post-mount brake interface use a stock size varying from 160mm to 203mm. It’s important to check your frame and fork for the default post mount size before ordering a suitable adapter. To calculate the size of the required adapter, subtract the frame/fork stock mount size from the desired rotor size. If you’re using brakes with large calipers (Magura MT5/MT7, Hope Tech V4, Hayes Dominion A4 etc.), please also order a low profile (button head) bolt kit to ensure correct fitment. Our disc brake adapters do not come with mounting bolts but if needed, we have sets of 4 bolts available. ?Not currently compatible with TRP 203mm rotors.

Fits: This hanger has an M12 x 1.25 thread on the hanger boss. The boss is 16.5mm tall. - 2009 Top Fuel 9.8 - 2010 Remedy 9.9, 9.8, 8, 7 - 2010 Fuel EX 9.9, 9.8, 9, 8, 8 WSD - 2010 Top Fuel 9.9 SSL, 9.8, 9.8 WSD, 8, 8 WSD - Gary Fisher HiFi, SuperFly *** This hanger is for bikes with the 2010 ABP race. It is NOT the same as 460-0502. Trek part #W307718 Features: - CNC machined from 6061 T6 Aluminum - Anodized pewter finish - Model: NSB DH0045

- Clear phone pocket - Fits iPhone 11 - Velcro attachment to top tube and steerer tube - Velcro and zipper closure storage compartment - 19 x 10 x 9.5cm