Your Search: "shimano"

RT1 Shimano GT Rack Type E-Bike Battery Lock

The Shimano Crank Tool (SCT for short) is specifically built to service the chainring lockring on Shimano single ring cranksets for 12 speed drivetrains. It features a large hex that can be used with a 1.5" or 38mm wrench or locked into a vise. The clearance hole is kept to a minimum to keep the tool engaged on the low profile lockring, minimizing the chance of damaging the tool or parts. Compatibility: - Chain ring lockrings on Shimano 12spd mountain crank sets. - XT and Ultegra bottom brackets

Our Shimano M9100 Narrow/Wide Snaggletooth chainring features our highly sought-after tooth profile. Combine this chainring with any modern-day clutch derailleur and never worry about dropping a chain again. - Highly sought after Bi Directional narrow-wide tooth design provides excellent chain retention without a chain guide - Direct mount for Shimano M9100, M8100, and M7100 and perfect for 1x setups - Features a perfect 51mm to 55mm chainline, depending on axle length and spacer configuration - CNC'd in Canada from 7075 aluminum with laser-etched graphics

Pre-tension Bolt for Shimano Hollowtech II Cranks and Shimano E-bike motors. Simplify things with an 8mm fitting and add a splash of your favourite anodised color. Never worry about turning the garage upside down at midnight to find that little 'thingy' to pre tension your cranks ever again. - Remember this product needs minimal torque and do not exceed the manufacturers maximum recommended torque 0.7 to 1.5Nm - Suits: XTR, XT, SLX, LX, Deore, Saint & Zee cranks and bikes with a Shimano e-bike motor.

Developed and designed entirely by CeramicSpeed, the Oversized Pulley Wheel (OSPW) System for Shimano 9000/6800 provides the ultimate optimization of your bicycle's drivetrain. This OSPW System features a set of 17-tooth aluminum Pulley Wheels housed in a specially designed polyamide (PA) and carbon cage. The upper and lower 17-tooth oversized aluminum pulley wheels come fitted with either standard or coated CeramicSpeed Bearings. The Oversized Pulley Wheel (OSPW) System is the product of choice by many of the world's leading cycling teams and triathletes. This specific system is compatible with Ultegra 6700/6770/6800/6870 mechanical and Di2 rear derailleurs and Dura Ace 7900/7970/9000/9070 mechanical and Di2 rear derailleurs. It is not compatible with Shimano Dura-Ace 9100/9150 and Ultegra 8000 series rear derailleurs. For those rear derailleurs you will need a OSPW System for Shimano 9100 series. The system is compatible with up to a 28-tooth cassette on most bikes, depending on derailleur hanger. The typical overall power savings of the OSPW System for Shimano 9000/6800 is 30%-60% over a stock setup, and the oversized pulley wheels have a lifespan that is 3-5 times longer than the commonly used standard pulleys on the market. In The Box: - A complete 17-tooth OSPW System - CeramicSpeed bearing oil in 15ml dropper bottle

PR1400 OXiC Disc Brake Pads - Brake pad inserts are made by Swiss Stop

Ratchet freehub bodies have a gloss finish and don't have a seal, as this is fixed on the hub shell. The Ratchet System was the first of this type for DT Swiss; used in the mid-range products like the 350 hubs. - End Cap Sold Separately

The new standard for durability and price. - Patented Star-Ratchet system - Contact-free seals and high precision build guarantee smooth bearings - Press-fit end caps allow tool-free maintenance and conversion

At the core of this all-around wheelset lies a modern, wide and light aluminum rim. Being the foundations of the wheel, it makes for a balanced width to stiffness to weight ratio. The rim is complemented by DT's proven pawl drive system and a high end build with bladed spokes and alloy nipples. These features make it a premium training wheel easily able to race your mates to the city limits sign. - Spline hub with 3-pawl system - Straight-pull hub and spokes are radial laced - Includes RWS Eco skewer, tubeless ready tape and tubeless valve

Dependable Independence – Reliability, versatility, and simplicity are united in a hub. The 350 hub is a dependable road mate for every adventure, whether on asphalt or gravel roads. A lightweight axle in combination with a milled hub body ensures a low weight while the proven Ratchet System with 36 teeth guarantees reliable power transmission. The plug-in construction allows maintenance of the freehub system without special tools and conversion to different standards - for maximum versatility. PRODUCT DETAILS: - A DEPENDABLE HUB The freehub Ratchet System makes the 350 the dependable partner for any ride - NO TOOL CONCEPT Plug-in hub construction allows for quick and tool-free maintenance - NEW ENDCAPS The new shape of the end caps facilitates disassembly and thus speeds up handling requiring disassembly - VARIETY The 350 hub is available for all common axle standards and for the various drivetrain systems. TECHNOLOGY: We believe in the art of engineering and strive for sophistication in the product development process. Our guiding idea is to constantly push barriers with our in-house developed technologies. LEGENDARY RELIABILITY: The patented freewheel system, which features high-precision star ratchets, guarantees top performance and reliability. The simultaneous engagement of the ratchet teeth makes the Ratchet System extremely reliable since the loads are distributed equally across a large contact surface.

Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape

Your entire focus lies on the right line choice, the exact braking point and the spot-on steering movement. All the everyday stress fades away, you feel free and only hear the precise sound of the freehub system. The E 1900 Spline wheels were developed precisely for these freewheeling moments. A proven aluminum rim and hand-laced steel spokes provide the reliability required from an Enduro wheel. - Intended use = All-Mountain/Trail, Enduro and Freeride - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape

After a long climb, the perfect trail lies ahead of your tires: flowy, dusty, varied, endless. Nothing holds you back from entering the All-Mountain thrills with the M 1900 Spline wheels. A rim developed with optimal balance of durability and weight offers efficient climbing characteristics as well as dent resistance on single trails. With experienced wheel building by hand, this wheel is a reliable partner to collect freewheeling moments in the mountains. - Intended use = XC and All-Mountain/Trail - Tubeless ready, 30mm wide and light rim - Straight-pull hubs/spokes built with a 3-cross pattern - Includes Tubeless Valve and Tape, 6-bolt adapter with lockring

Enter the Cross-Country world with the X 1900 Spline wheels. The 25 mm wide aluminum rim offers modern tires the support needed to ride low air pressure in order to minimize rolling resistance. Meticulous wheel building by hand ensures the highest quality and reliability, allowing riders to just focus on the moment - whether it is beating the sweat out of their opponents or beating their own KOM or QOM.

EX 1700 SPLINE wheels are built on 36t ratchet hubs combined with a super strong and welded 30 mm wide aluminum rim. The rim profile is designed to withstand the hardest use of Enduro racing while still keeping the weight low for long and demanding uphills. Laced to double butted competition straightpull spokes, the EX 1700 SPLINE wheels are built to take a beating. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for Enduro applications

The XM 1700 SPLINE wheels were designed to dominate the mountain. Light and robust welded rims with perfect tubeless compatibility for grip and puncture resistance. Built on reliable 350 hubs with 36 tooth ratchet engagement. - Welded Aluminum rim with 30mm internal width - 350 hub with 36 point SL Ratchet system - Competition spokes and Squorx nipples - Designed for All Mountain applications

The XMC 1501 SPLINE ONE was designed for all kinds of mountain adventures. A 30 mm tubeless optimized carbon rim easily supports wider tires, while the double butted competition race spokes and 240 hub with Ratchet EXP completes this durable and versatile wheel. - Designed for All Mountain applications - Carbon rim with 30mm internal width - 240 hub with Ratchet EXP driver - Competition race spokes and Squorx nipples

Special tooth shape guarantees a tighter contact with chain - Chamfered edges and wide mud gap keeps the ring from getting muddy - Increased tooth height improves chain retention - Variable teeth thickness prevents chain dropping - Offset: 3.3mm - 7075-T651 Anodized Aluminum Alloy - Compatible cranksets: Shimano M7100/7120/8100/8120 1X/2X - Weight: 57g - Compatibility: 9,10,11-speed chains, 12-speed SRAM (Eagle&T-Type), KMC, Shimano HG+ chains *** Also available in Blue, Gold, Green, Orange, Red, Silver or Violet. Please contact sales to order.***

Special tooth shape guarantees a tighter contact with chain - Chamfered edges and wide mud gap keeps the ring from getting muddy - Increased tooth height improves chain retention - Variable teeth thickness prevents chain dropping - Offset: 3.3mm - 7075-T651 Anodized Aluminum Alloy - Compatible cranksets: Shimano M7100/7120/8100/8120 1X/2X - Weight: 53g - Compatibility: 9,10,11-speed chains, 12-speed SRAM MTB (Eagle&T-Type), KMC, Shimano HG+ chains *** Also available in Blue, Gold, Green, Orange, Red, Silver or Violet. Please contact sales to order.***

Now you can use wide-range cassettes (up to 50T) with your GRX rear derailleur. Moving the upper derailleur pulley closer to the smallest cassette cog, and lower one further away from the largest cog allows your regular GRX derailleur to operate seamlessly with wide-range cassettes, like the Garbaruk 11-50T 11-speed model. - 7075-T651 Anodized Aluminum Alloy - 47g IMPORTANT: The cage is to be used in 1x setup only with the listed compatible rear derailleurs. Compatible rear derailleurs: Shimano 11-speed: RD-RX812 (GRX)

With Garbaruk RD cage for 11-speed Shimano rear derailleurs, you can squeeze much more performance out of your standard 11-speed rear mech thanks to the more efficiently positioned rear derailleur cage. You can now use cassettes up to 50T, which provides 11-speed 1x drivetrain range close to that of 12-speed ones.. By re-positioning the upper derailleur pulley closer to the small cassette cog and further away from the largest cog, we have been able to allow rear derailleurs designed to be used with 11-46T cassettes to be capable of running smoothly with 10-50T cassette. - 7075-T651 Anodized Aluminum Alloy - 48g IMPORTANT: The cage is to be used in 1x setup only with the listed compatible rear derailleurs Compatible rear derailleurs: Shimano 10-speed: Deore (M6000, 10-speed model) Shimano 11-speed: RD-M7000-11 (SLX), RD-M8000(XT), RD-M9000 (XTR) **NOTE: NOT compatible with Di2 (XT M8050, XTR M9050) rear derailleurs.**

Our new derailleur cage for Shimano 12-speed MTB derailleurs is everything you need from a derailleur cage. We've united extreme rigidity (cage is CNC-machined out of 7075-series aluminum alloy), feather-like weight (48 grams) and exciting color options. - 7075-T651 Anodized Aluminum Alloy - 48g IMPORTANT: The cage is to be used in 1x setup only with the listed compatible rear derailleurs. Compatible rear derailleurs: Shimano 12-speed: RD-M7100 (SLX), RD-M8100 (XT), RD-M9100 (XTR) SGS (long-cage version only).

Upgrade your standard 11-speed rear mech with our 11T+16T set coupled with Garbaruk RD cage for 11-speed Shimano derailleurs for improved shifting quality. - 7075-T651 Anodized Aluminum Alloy - 20g Compatible rear derailleurs (when equipped with Garbaruk Shimano 11 speed cage): SLX RD-M7000-11-GS, XTR RD-M9000, XT RD-M8000 Bolts for pulleys are not included

Upgrade your standard 12-speed rear mech with our 14T+16T set coupled with Garbaruk RD cage for 12-speed Shimano derailleurs for improved shifting quality. - 7075-T651 Anodized Aluminum Alloy - 22g Compatible rear derailleurs (when equipped with Garbaruk Shimano 12 speed cage): SLX RD-M7100-SGS, XT RD-M8100-SGS, XTR RD-M9100-SGS Bolts for pulleys are not included

Special tooth shape guarantees a tighter contact with chain - Chamfered edges and wide mud gap keeps the ring from getting muddy - Increased tooth height improves chain retention - Variable teeth thickness prevents chain dropping - Offset: 5.5 mm - 7075-T651 Anodized Aluminum Alloy - Compatible cranksets: Shimano GRX RX600-1/810-1 - Weight: 57g - Compatibility: 9,10,11-speed chains, 12-speed SRAM MTB (Eagle&T-type), KMC, Shimano HG+, SRAM AXS Flattop chains *** Also available in Blue, Gold, Green, Orange, Red, Silver or Violet. Please contact sales to order.***

Special tooth shape guarantees a tighter contact with chain - Chamfered edges and wide mud gap keeps the ring from getting muddy - Increased tooth height improves chain retention - Variable teeth thickness prevents chain dropping - Offset: -1.5 mm - 7075-T651 Anodized Aluminum Alloy - Compatible cranksets: Shimano Ultegra 8000 - Weight: 136g - Compatibility: 9,10,11-speed chains, 12-speed SRAM MTB (Eagle&T-type), KMC, Shimano HG+, SRAM AXS Flattop chains *** Also available in Blue, Gold, Green, Orange, Red, Silver or Violet. Please contact sales to order.***

The most durable and lightweight 11-speed cassette with a wide range of gears, compatible with the common Shimano hub. Manufactured using a high quality chromoly steel alloy combined with the strongest aluminum sprocket - this cassette is the perfect solution for all cyclists looking for an effective way to increase the performance of their bike. - Chromoly steel alloy + 7075-T651 Aluminum Alloy (largest cog) - CNC milling - Weight: 317g - Cogs: 11-13-15-17-20-24-28-32-36-42-50 - Freehub: Shimano HG - Compatible rear derailleurs: Shimano 11-speed: RD-M5100-SGS (Deore), RD-M7000-11 (SLX), RD-M8000/M8050 (XT/XT Di2), RD-M9000/9050 (XTR/XTR Di2). **Not compatible with KMC and YBN chains!**

What's everybody been waiting for - a Garbaruk 12-speed cassette compatible with Shimano Micro-Spline freehub standard - is here. Now you can combine the latest drivetrain technologies on the market with unique performance components made by Garbaruk. Lightweight and rigid design, combined with unique teeth profile allows for silk-smooth shifting and no chaindrops while backpedaling. At 349 grams, Garbaruk Micro-Spline-compatible cassette is a no-compromise solution beyond any of the existing competitive products on the market. - Chromoly steel alloy, nickel coated + 7075-T651 Aluminum Alloy (largest cog) - CNC milling - Weight: 353g - Cogs: 10-12-14-16-18-21-24-28-32-37-44-52 - Freehub: Shimano Microspline - Compatible rear derailleurs: Shimano 12-speed: RD-M7100 (SLX), RD-M8100 (XT), RD-M9100 (XTR) SGS (long-cage) version only, RD-M6100 (Deore)-SGS **Not compatible with KMC and YBN chains!**

- USB-A Edge Power Mount Cable - 400mm

Recon-E Light to Shimano motor unit connector cable.

- Made of Cr-V steel - To be used with 1/2" driver

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions. - Compatible with Shimano Dura-Ace R9170, Metrea U5000, Ultegra R8070, and Road RS305, RS405, RS505, and RS805 - Compatible with Rever MCX1 Flat-Mount and MCX2 Flat-Mount

Jagwire Sport Organic pads feature an all-new resin compound. Mounted on a steel backing plate, this compound gives good power and modulation, while keeping noise to a minimum. Great for riders primarily riding in dry conditions.

Jagwire's Mountain Sport Disc Brake Pads (Shimano) feature a low-noise, semi-metallic compound mounted to a steel backing plate for excellent braking performance and durability.

Jagwire Disc Brake Hose Parts - For use only with Shimano branded hydraulic hose

Keep your disc brakes working great with Jagwire's Mountain Pro Disc Brake Pads. They have a high-performance semi-metallic compound and lightweight aluminum backing plates to keep the weight low, making them perfect for cross-country riding. These are the correct replacement pads for most Shimano disc brakes.

- Compound designed considering the higher weight and faster speed of E-bikes - Tuned for power, durability, and low noise

Compression Bushing compatible with Shimano/Tektro.

Keep your disc brakes working great with Jagwire's Mountain Pro Extreme Disc Brake Pads. An aggressive sintered compound is mounted to a vented, steel backing plate making these pads perfect for wet conditions and downhill riding. These are the correct replacement pads for most Shimano disc brakes.

Pro Extreme Sintered pads feature an aggressive compound that provides maximum stopping power making it perfect for DH riding. The dense, sintered compound also resists water making it extremely effective in wet conditions. - Compatible with Shimano R9170, Metrea U5000, Ultegra R8070, and Road RS305, RS405, RS505 and RS805 - Compatible with Rever MCX1 Flat-Mount and MCX2 Flat-Mount

- Lightweight aluminum cooling fins integrated into the backing plate. - A graphene thermal transfer plate pulls heat away from the semi-metallic compound and rotor and into the cooling fins - Prevent brake fade and warped rotors.

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers. - Allow the easy installation of Jagwire hose with Shimano disc brakes - Kits contain enough hardware for both front and rear brakes - Requires Jagwire Mountain Pro Universal Disc Brake Hose Kit for installation Compatibility - HFA312: Shimano XTR M975, Deore XT M775, SLX M665, LX T665 and M585, Hone M601, Deore T615, M595, M535 and M525, Alfine S500 and S501, Metrea U5000, Alivio M4050, Acera M3050, and Non-Series T605, MT500, M575, M486, M485, M446, M445, M395, M365, and M355 - HFA314: Shimano Dura Ace R9120, R9170, R9180 and Ultegra R8020, R8070

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic lines (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to enhance braking performance and simplify disc brake setup. Each adapter kit contains all the components required to connect both front and rear lines to the levers calipers.

Kool-Stop's E-Bike disc pads are produced with a ceramic barrier between the organic friction material and the steel backing plate to reduce heat transfer into the brake caliper causing brake fade. With the heavier design and quick speeds of Electric bikes, they require a compound that will hold up and provide consistent braking power. - Qty 1 = enough for 1 wheel

- High performance compounds recommended for all-conditions - Steel backing

• High performance compound recommended for all•conditions • Alloy backing plate: 50% lighter than steel backing plate

With a copper plated back plate, Kool-Stop sintered metal disc brake pads are designed to give your bike performance braking in extreme conditions, e.g. XC, downhill, trials and dual slalom riding. The pads have a quick break-in period so you get maximum performance during those demanding rides when stopping power, durability and long pad life are required.

• Aluminum backing with extended cooling fins help regulate brake system temperature • High performance organic compound

Imagination is the only limitation to how much the microSHIFT bar-end shifters can do. Their small, minimalistic designs are packed with precision machined mechanism that allows you to shift accurately with either index or friction mode. Go on any adventure without worries for mechanical issues. - Includes shift cables

Narrow-wide 1x12 chainrings for Shimano direct-mount cranks. These chainrings are designed to give the optimum chain line, providing the smoothest shifting across the whole cassette. Our Shimano direct mount chainrings are direct replacements for the OEM rings: SM-CRM75 SM-CRM85 SM-CRM95 The one-piece 7075 T6 Aluminum construction is lighter than the SM-CRM75 SM-CRM85 and has a similar weight to the SM-CRM95. Fits: - Shimano XTR FC M9100-1 M9120-1 - Shimano XT FC M8100-1 M8120-1 M3130-1 - Shimano SLX M7100-1 M7120-1 M7130-1 - Shimano Deore FC-M6100-1 FC-MT6120-1 FC-M6113-1 Specifications: - Chainrings are compatible with Shimano HG12 12-speed chains such as: - XTR CN-M9100 - XT CN-M8100 - SLX CN-M7100 - Machined from solid 7075 T6 Aluminum - Anodized Black with Laser Etched Graphics Chainline: Shimano Chainline is determined by crank spindle length and spacers. The chain lines with our chainrings on Shimano cranks are as follows. FC-M9100-1 = 52mm C.L. FC-M9120-1 = 52mm C.L. FC-M8100-1 = 52mm C.L. FC-M7100-1 = 52mm C.L. FC-M8120-1 = 55mm C.L. FC-M7120-1 = 55mm C.L. FC-M7130-1 = 56.5mm C.L. FC-M8130-1 = 56.5mm C.L. Ring Offset: 5mm – from crank mounting face to center of teeth Weight: 28T – 75 g 30T – 90 g 32T – 105 g 34T – 119g

Our narrow wide chainring for Shimano XT cranks with a 96 BCD. The tooth pattern ensures long ring life with excellent chain retention and all of our chainrings feature an optimized chainline for 1x systems. Fits: - Shimano Deore XT M8000 1x11 and 2x11 cranks: FC-M8000-1 FC-M8000-2 - Shimano SLX M7000 Specifications: - 28T chainring uses 64mm BCD to mount onto the crank arm. - 49mm Chainline - CNC machined from 7075 T6511 Aluminum - Ring Sizes: 28T, 30T, 32T, 34T, 36T - Compatible with all 9, 10, 11, 12-speed SRAM drivetrains - Compatible with all 9, 10, 11-speed Shimano drivetrains Precision CNC Machined in Whistler, B.C. Weight: 28T – 45g 30T – 40g 32T – 45g 34T – 50g 36T – 55g

The NSB narrow-wide chainring uses a variable tooth thickness mated with a standard chainring tooth profile to help retain the chain on the front ring during all types of riding. The tooth profile maintains excellent wear for a durable product and has an optimized chain line for 1x systems. These chainrings are specifically made for Shimano XTR Race M985 cranksets. Specifications: - 88mm Bolt Diameter Circle (4 bolt 88 BCD) - Bottom Bracket Types: Outboard/External Bearing Cups - Chainline: 45mm (ring mounted inside crank) - Machined from solid 7075 T6 Aluminum - Anodized Black with Laser Etched Graphics - Compatible with all 9, 10, 11, & 12-speed SRAM drivetrains Compatible with all 9, 10, & 11-speed Shimano drivetrains Precision CNC Machined in Whistler, B.C. Weight: 28T – 35g 30T – 37g 32T – 42g 34T – 47g

Park's Spoke Wrench For Shimano Wheel Systems is the right tool for the job. It's made of durable tool steel and features 4.4mm and 3.75mm openings to fit all Shimano Wheel System nipples located at the hub and at the rim. It's vinyl-coated for a great grip, too.

Designed and built to remove and install Shimano direct mount chainring lockrings found on XTR 9120, XT 8120, MT900, and other Shimano direct mount systems. Precisely CNC machined from 6061 aluminum for a perfect fit and to prevent marring expensive parts. - Machined flat face for optimal lockring engagement - For lockrings with 41mm outside diameter and 16 notches - 36mm hex drive to be used with Park Tool TWB-36 Crow Foot and a torque wrench to properly measure torque - 6061 aluminum construction

The BBT-29 is a double-ended bottom bracket wrench designed to fit 16-notch bearing cups with an outside diameter of 39mm (e.g. Shimano Dura-Ace 9000 series and XTR 980 series) as well as 16-notch bearing cups with an outside diameter of 48.5mm (e.g. FSA MegaEvo).

Replacement Shimano / SRAM Freehub body for a Twenty-Four Series road rear wheel (11-speed).

Reserve 30 wheels feature a 30mm internal width that supports 2.3-2.5" tires, and the thick rim beads stand up to the abuse of tough, rocky, steep tracks ridden at elite speed. While DH rims see greater single impacts, nothing beats the full weekend of regular abuse that an EWS race dishes out. To say nothing of the infamous 'Anti-Grip' and the rocks buried within the moondust in the Andes of Chile. - Designed for DH riding and racing - Carbon fiber construction with 4mm asymmetric offset - Reinforced rim bed for impact resistance - Rated for e-bike use - Ships with rim tape installed, tubeless-ready valves, and cards identifying the builder of each of your wheels - Backed by a lifetime warranty

TL-EW300 Di2 Cable Tool

- Replacement chain pin for 7- and 8-speed Shimano chains - 3 replacement pins per pack

Shimano Replacement pads for Mountain brake shoes - Color: Black - Intended Brake Type: Linear Pull - Pad Attachment Style: Threaded Post - Pad Type: Replacement Insert - Cartridge - Rim Compatibility: Standard - Shimano Cartridge-type mountain brake pads fit models: XTR BR-M970, BR-M960, BR-M951, BR-M950 XT BR-T780, BR-M770, BR-M760, BR-M750, BR-M739, BR-M737 LX BR-T670, BR-M580, BR-M570 Deore BR-M530, BR-M510 Alivio BR-M430, BR-MC18 Acera BR-M422, BR-M421, BR-M420, BR-M330, BR-T300 DXR BR-MX70 MX BR-M600 - M70R2: Severe condition brake pad, high performance in dry or wet conditions