Your Search: "TRP"

Service your TRP brakes like a pro with our new Bleed Funnel. COMPATIBILITY CHART BRAKE MODEL COMPATIBILITY QUADIEM SERIES YES TRAIL SERIES YES SLATE SERIES NO* HYLEX SERIES YES HY/RD SERIES YES HYDRO TT YES DASH SERIES NO After feedback from our pro Athletes (and their mechanics) we have developed the TRP bleed funnel to simplify the bleed process. Take your service to the next level. *Slate uses a smaller bleed fitting. Funnel can be used with a slate Bleed fitting adapter

In 2016, TRP began working with reigning world cup champion, Aaron Gwin, to redesign our DH-R EVO brakes. Out of the gate, he was impressed with the initial level of performance, but he did have a list of improvements needed to achieve world cup-winning performance. Working closely with the TRP development team, improvements were made in nearly every part of the brake and tested on the world cup circuit throughout the season. We took most of the changes made to the DH-R EVO brakes and put them into the Slate T4. This brake features the same ergonomic lever made from cast aluminum and a forged/CNC'd caliper, both of which were given a matte black finish. It also features a new and stiffer 5.0mm hose for easier internal routing and better transfer of hydraulic power. Riders will also find benefits in the four-piston caliper, tool-free reach adjust, and top-loading caliper. NEW CNC ADAPTERS - CNC machined - Increased stiffness and clean fit - Simple information marking NEW BRAKE PADS - New performance resin compound - Increased thermal stability - Shorter bed-in process NEW MINERAL OIL - Lower viscosity for better fluid flow - Increased heat stability up to 230 oC - Easier to bleed ERGONOMIC LEVER BLADES - Lightweight aluminum body - Ergonomic single finger positioning - Dimpled accents for better grip on the trail NEW 5MM HYDRAULIC HOSE - Increased stiffness for better hydraulic pressure - Increased thermal stability - Easier to work with for internal frame routing

The Spyre is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine-tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 154g per caliper - Dual-sided actuation - Works with ALL cable-actuated road levers. Compressionless (linear strand) housing is highly recommended - Comes with TRP ultra-grippy semi-metallic pads - Calipers are compatible with Shimano M525/M515 pads - 160mm rotors recommended on front wheel - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only

- For all TRP and Tektro hydraulic braking systems - Non-corrosive mineral oil - Increased Boiling point to 270 degrees C - Decreased viscosity for better fluid flow

- Replacement hoods for your Hylex levers. - Color: Black or Gum - Comes in a set of left and right

TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Two-piece is now combined with TRP’s new slotted rotor is design. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions. - Sizes: 140mm, 160mm, 180mm, and 203mm - Six slots to remove water, mud, and debris - Two-piece design for heat management and stiffness

TRP’s two piece rotors offer superior heat dissipation due to the aluminium center as well as excellent stiffness to provide you with confidence in your braking. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape during braking. Upgrade the stopping power and heat dissipation by increasing the size of your rotor giving you more surface area and leverage. SPECIFICATIONS - Sizes: 140mm, 160mm, 180mm, and 203mm - Colors: Black Center - Compatible with Centerlock hubs - Does not include lock-ring

Integrated Mountain bike shifter adapters for TRP brakes are now available for Shimano I-Spec B, I-Spec II, and SRAM MatchMaker. Adapters will mount your shifter or dropper lever directly to your TRP brakes to keep your cockpit nice and tidy.

The Spyre SLC is a mechanical disc brake that offers superior performance with incredibly easy setup. This is a dual-piston-actuated mechanical disc brake caliper that provides precise clamping force. This translates into even pad and rotor wear, because the rotor does not need to flex to one side during braking. We added a simple cable barrel adjuster to make fine tuning easy. All of this in an incredibly thin 40mm, 146g package that works with any drop bar levers on the market. Rotors and adapters are sold separately. For tandem bikes, we recommend the Spyre caliper paired with our 2.3mm thick rotors. This will give optimum stopping performance for you and your partner. SPECIFICATIONS - Weight: 146g per caliper - Carbon actuation arm for maximum rigidity, and weight savings - Dual-piston actuation - Works with ALL cable actuated road levers. Compressionless (linear strand) housing is highly recommended - TRP ultra-grippy semi-metallic pads. These are compatible with Shimano M525/M515 pads - Rotors, adapters, and flat mount mounting bolts sold separately - All flat mount calipers being mounted to the fork require the FF-5 Front Flat Mount 140/160mm adapter - Sold as a caliper only

Ergonomics are key to Aaron, which is why he wanted something a little different. As a result, TRP engineers looked at the cable release lever's ergonomics and devised a system to move it in a linear path to mimic the motion of a rider's thumb, rather than rotating it away. This unique positioning allows for a more consistent contact patch providing overall better grip and shifting performance when the trail gets rowdy. - Shift levers designed and located for optimum performance by Aaron Gwin - New linear actuation for improved ergonomics and consistent thumb contact - Enhanced grip & tactile feel built into lever paddles: embossed grooves on advance and release lever - Carbon fiber upper housing & advance lever position with brake lever - Ball bearing equipped - 12 speed - Tool-free straight-lace cable changes - Rider-adjustable home position of lower lever with a 40-degree range

Can be used to provide extra clearance between brake caliper and spokes. Spacer should be placed between rotor and hub.

TRP's two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Its two-piece design is now combined with TRP's new slotted rotor design with a 2.3mm thickness for DHR and E-MTB only. When debris gets trapped between the pad and rotor, braking power is dramatically reduced. This rotor's six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking for more consistent braking power and modulation in mixed conditions. - Six slots to remove water, mud, and debris - Two-piece design for heat management and stiffness

- Set of (6) precision machined Torx T25 titanium disc rotor bolts

The TR12 drivetrain system is the result of an intimate development relationship with 5x DH World Cup Overall Champion, Aaron Gwin, and his personal mechanic, John Hall. From start to finish, the project spanned more than two full years of conceptualizing to achieve this high-performance design. DERAILLEUR The new TR12 rear derailleur is able to provide a quiet and accurate ride over the roughest trails. The key feature to this pursuit is the Hall Lock. During the Race season, lead mechanic for Intense Factory Racing, John Hall, noticed excessive movement around the B-knuckle when riding over rough rock gardens and in tracked out corners. This was leading to more chain skipping and slapping creating possible variances in shifting. This inspired John's idea to lock the B-knuckle to the bike's derailleur hanger. TRP engineers worked closely with Hall to create this feature, The Hall Lock. - Hall Lock - G-Spec Ratchet Clutch - G-Spec finishing touches - Carbon fiber cage & upper link - Extra-wide parallelogram pivot - Sealed cartridge bearing pulleys SHIFTER Ergonomics are key to Aaron, which is why he wanted something a little different. As a result, TRP engineers looked at the cable release lever's ergonomics and devised a system to move it in a linear path to mimic the motion of a rider's thumb, rather than rotating it away. This unique positioning allows for a more consistent contact patch providing overall better grip and shifting performance when the trail gets rowdy. - Shift levers designed and located for optimum performance by Aaron Gwin - New linear actuation for improved ergonomics and consistent thumb contact - Enhanced grip & tactile feel built into lever paddles: embossed grooves on advance and release lever - Carbon fiber upper housing & advance lever position with brake lever - Ball bearing equipped - 12 speed - Tool-free straight-lace cable changes - Rider-adjustable home position of lower lever with a 40-degree range

TRP's new DH7 shifter is molded from carbon fiber and features TRP's linear release action for upshifting to higher gears. This unique mechanism allows the cable release lever to more closely mimic the motion of a rider's thumb, producing super-fast and super-precise shifts out of the starting gate while maintaining a tight grip on the handlebar. - Shift levers designed and located for optimum performance by Aaron Gwin - Enhanced grip & tactile feel built into lever paddles: embossed grooves on advance and release lever - Carbon fiber upper housing & advance lever position with brake lever - Ball bearing equipped - 7 speed - Tool-free straight-lace cable changes - Rider-adjustable home position of lower lever with a 40-degree range

- For hydraulic braking systems - Non-corrosive mineral oil - Excellent heat managment properties - Volumes : 50ml or 1000ml

Flat mount front adapter for both 140mm or 160mm rotors. All mounting hardware included in package.

Flat mount rear adapter for a 160mm rotor

TRP HY/RD disc brake calipers have the power and modulation of hydraulic disc brakes. True ‘plug-and-play’ compatibility with existing cable actuated systems. - Self-contained hydraulic caliper incorporates master cylinder - Hydraulic system self-adjusts for pad wear - Compatible with all mechanical road and CX brake levers - Brake pad composite is Resin with Metal Fibers - Resin with Metal Fibers pads are compatible with Resin-Only type rotors as well as standard rotors

Integrated Mountain bike shifter adapters for TRP brakes are now available for Shimano I-Spec B, I-Spec II, and SRAM MatchMaker. Adapters will mount your shifter or dropper lever directly to your TRP brakes to keep your cockpit nice and tidy.

Adapters to convert your flat mount fork to post mount calipers - FF-1 front 140mm rotor - FF-2 front 160mm rotor - FR-1 rear 140mm rotor - FR-2 rear 160mm rotor - Each includes two bolts

The new TR12 rear derailleur is able to provide a quiet and accurate ride over the roughest trails. The key feature to this pursuit is the Hall Lock. During the Race season, lead mechanic for Intense Factory Racing, John Hall, noticed excessive movement around the B-knuckle when riding over rough rock gardens and in tracked out corners. This was leading to more chain skipping and slapping creating possible variances in shifting. This inspired John's idea to lock the B-knuckle to the bike's derailleur hanger. TRP engineers worked closely with Hall to create this feature, The Hall Lock. - Hall Lock - G-Spec Ratchet Clutch - G-Spec finishing touches - Carbon fiber cage & upper link - Extra-wide parallelogram pivot - Sealed cartridge bearing pulleys

TRP’s two-piece rotors offer superior heat dissipation due to the aluminum center as well as excellent stiffness to provide you with confidence in your braking and lighter weight in 180/203mm sizes. Two-piece is now combined with TRP’s new slotted rotor design now with a 2.3mm thickness for DHR and E-MTB only. Six recessed slots create channels to allow water, mud, and other debris trapped between the pad and rotor to escape under braking. When debris gets trapped between the pad and rotor braking power is dramatically reduced, these recessed slots maintain a more consistent brake feeling in mixed conditions.

- Converts 140 post mount to 160 or 160 post mount to 180mm - Simplified and lower profile design allows for the use of only 2 bolts instead of 4 - Compatible with all TRP and Tektro disc caliper 160, 180, and 203 rotor sizes

Topeak's MTX TrunkBag DX boasts an expandable main compartment to carry all the gear you need. It's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, taillight clip and top elastic straps. There are even reflective strips for safety. Plus, Topeak's ingenious MTX System makes it a snap to attach it to your Topeak MTX QuickTrack rack (sold separately). - Capacity 12.3 L / 750 ci - Compartments 1 Divided main compartmetn, two side zippered pockets, Multi-expanding top compartment - Added Features: Water bottle holder Shoulder strap Carrying handle Elastic top bungees 3M reflective strip Safety light clip Optional rain cover - Size (L x W x H): 36 x 25 x 21.5-29 cm / 14.2” x 9.8” x 8.5”~11.4” - Weight: 985 g / 2.17 lb

A fully-featured trunk bag with organizer pockets, dividers, and multiple expandable compartments and a top mount bungee system, allowing you to have as much or as little storage as you require for each journey. - OCEANWEAVE 600D reclaimed fishnet polyester with waterproof polyurethane coating. - Water-resistant stitched construction - Lightweight, universal Velcro attachment system attaches to the top of rack. - Padded/insulated construction controls internal temperature and keeps load quiet. - Main compartment expands vertically for an additional 2.9L / 177 cu/in. - Side pockets expand to provide an additional 5.8L / 254 cu/in. - Top bungee system for additional, flexible storage. - External rear zippered pocket. - Internal mesh pocket in lid. - Internal organizer pocket. - Adjustable internal divider. - Ultra-visible three-way 3M triangle logos + extra 3M reflective stripe. - Ultra-stiff Polypropylene backing plates built into fold-down pockets. - Rear light clips. - Carry handle. - Mini pump straps. - Shoulder strap included. - Rain cover available separately.

- Trunk bag, waterproof (IPX3) - Elastic cord ontop and mesh side pockets - Removable and adjustable shoulder strap - Waterproof lining with roll top - Fastening: 4 straps at bottom - Compatible with iRack, Racktime and Carrymore system - 7L

Topeak's RX TrunkBag EX is the ideal add-on for carrying your gear. It's built to last with rigid molded panels mated to 600-denier polyester. And, it's packed with handy features, such as a shoulder strap, carrying handle, taillight clip and top elastic straps. There are even reflective strips for safety. And, Topeak's ingenious RX System makes it a snap to attach it to your Topeak RX QuickTrack rack (sold separately).

Topeak's MTX TrunkBag DXP boasts a pop-up main compartment and expandable side panniers so it's capable of carrying plenty of gear. Plus it's built to last with rigid molded panels mated to 600-denier nylon. And, it's packed with handy features, such as a shoulder strap, carrying handle, bottle holder, taillight clip and top elastic straps. There are even reflective strips for safety. And, Topeak's Velcro straps make it a snap to attach to your rear rack (sold separately).

Topeak's RX TrunkBag DXP boasts a pop-up main compartment and expandable side panniers so it's capable of carrying plenty of gear. It's built to last with rigid molded panels mated to 600-denier polyester. And, it's packed with handy features, such as a shoulder strap, carrying handle, taillight clip and top elastic straps. There are even reflective strips for safety. Plus, Topeak's ingenious RX System makes it a snap to attach it to your Topeak RX QuickTrack rack (sold separately).

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: IS42/28.6/H9/K|IS42/30/H1 • Top Type: IS - Integrated • Top Head Tube Inside Dia.: 42.00mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 9mm (Short), 15mm (Tall) • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 72g

Serfas' RX saddle is your prescription for riding in comfort. It boasts a cutaway top that minimizes pressure, dual-density padding for cushioning, and a protective layer of friction-fighting Reactive Gel. What's more, the Twin Bar design allows each side to flex independently for even more comfort while the four-way stretch Lycra top increases the saddle's longevity. • Twin Bar Design • Rails: Steel • Size: 267mm x 171mm • Weight: 485 Grams • Cover: Silk-Tech Lycra

If you have a full-suspension bike, a small bike or any bike without a traditional top tube, you need Evo's Top Tube Adapter to attach your bike to your rack. The vinyl-coated clamp protects your bike's finish, and is coated with a rust-free powder coat. It fits up to 44mm headsets and up to 38mm seat post diameters.

Serfas' Women's RX saddle is your prescription for riding in comfort. It boasts a cutaway top that minimizes pressure, dual-density padding for cushioning, and a protective layer of friction-fighting Reactive Gel. What's more, the Twin Bar design allows each side to flex independently for even more comfort while the four-way stretch Lycra top increases the saddle's longevity. • Twin Bar Design • Rails: Steel • Size: 267mm x 171mm • Weight: 485 Grams • Cover: Silk-Tech Lycra

The Top Tube Pack is a durable, water-repellent, easy-to-reach pack for extra storage on your top tube. - Water-repellent YKK-zipper (FGP) - Additional mesh pockets - Includes frame-protection stickers - Cable inlet (GPS, Mobile) - Quick and easy-to-use Velcro fixation

Zipp's Stem Top Cap and Bolt are designed to work specifically with Zipp stems. The eight-gram aluminum cap and nine-gram-bolt are the same as those used on bikes built for Zipp-sponsored professional teams. The bolt has a T25 Torx head for ease of adjustment and so you need only one tool for your Zipp cockpit.

A useful standalone bag for daily riding or as part of a larger bikepacking setup, the Expedition Top Tube Pack is a lightweight, secure storage space that’s ideal for stashing frequently used items on the road. Available in 0.5L and 1L volumes, the smaller top tube bag is suited for storing bars and snacks, while the larger version can also accommodate smartphones and battery packs. It fastens securely to the top tube, opening and closing via an easy access one-finger zipper puller. Adjustable attachment points ensure that the bag is versatile enough for a range of different frames. The top tube bag is equipped with an innovative waterproof slider. While it looks like a normal zip, it’s better — it’s fully waterproof. However, it does need a little more care than a regular zipper, as excess strain can cause the rails to detach from the sliding mechanism. In particular, it’s important to not over-pack your top tube bag. Features - Waterproof slider and welded seams ensure contents stay dry - One-finger zipper puller ensures convenient and easy access on the go - Protected battery cable port - Lightweight waterproof laminate, developed specifically for Apidura - Reflective exterior graphics for increased visibility Materials - The Expedition Top Tube Pack is cut from a three-layer laminate fabric that was developed specifically for Apidura. The material is lightweight, and is highly resistant to tears and abrasion. Notably, it’s welded together at the seams, creating a watertight seal that ensures the top tube bag remains completely waterproofing. Care - Wash the top tube bag by hand, using a mild diluted soap if necessary. Afterwards, let it air dry. - Do not machine wash, machine dry, or iron. - Excess strain can cause the rails to detach from the sliding mechanism. Do not over-pack.

The Racing Top Tube Pack is designed for ultra-distance cycling competition and the needs of time-conscious riders. With an innovative magnetic quick-access flip-top opening, this waterproof top tube bag is ideal for storing battery packs, mobile phones and race essentials. This waterproof top tube bag, constructed from an ultralight laminate developed for Apidura, fastens securely to the top tube and works alongside a wide range of frame bags. The completely waterproof flip-top opening provides fast access and a clear view of the full contents of the bag, while keeping your belongings dry. A closed-cell foam padding structure protects your frame and electronics from damage and for added convenience, a protected cable port enables charging of devices on the go. Specially designed, high-contrast reflective features enhance side visibility in all light conditions. The Race Top Tube Pack is a useful standalone pack for daily riding or as part of a full Racing Series setup. Features - Flip-top opening for fast access - Secure magnetic closure - Overall low weight - Protected electronics cable port - Reflective exterior graphics for visibility - Constructed from ultralight waterproof Hexalon Materials - The Racing Top Tube Pack is made from Hexalon, a bespoke laminated fabric developed specifically for Apidura. Designed to fit the demands of ultra-distance competition and audax, the material is waterproof and lightweight, with strong tear and abrasion resistance. - The attachment points are reinforced with Hypalon, a durable rubberized nylon that provides extra protection against friction and puncture. Care - Wash the Racing Top Tube Pack by hand, using a mild diluted soap if necessary. Afterwards, let it air dry. - Do not machine wash, machine dry, or iron.

- Aero and ventilated with design suited for all triathlon distances featuring multi-directional aerodynamics - Short-tail design provides best aerodynamics on all types of courses - FlowStraps for improved aerodynamics - Fidlock magnetic buckle - Forced air cooling technology for keeping rider cool - Height adjustable and ponytail compatible ZoomAce retention system

Made for the rigors of everyday shop use, this adjustable tap handle fits many common bicycle taps. • Fits most metric taps from M4-M12 • Fits most standard taps from #8-9/16”

Easy access to your essentials like ride food, sunscreen, or your smart phone/camera can make or break a ride. Blackburn has redesigned their Outpost Top Tube Bag to fit more bikes, better. Now featuring longer, removable straps and optional 63mm-spaced, M5 bolt holes, the Outpost TT Bag will fit any bike for any ride. - Spacious interior with adjustable organizer - Exterior mesh pocket for phone or camera - Zippered I.D. and cash pocket - Top tube straps adjust to mount quickly on almost any bike - 70D Nylon, 4mm ripstop with water resistant treatment and backing

A streamlined and secure space to store frequently-used items, whatever the terrain. The Backcountry Top Tube Pack is a convenient space to store frequently used items, whether navigating a challenging trail or on a daily commute. The mountain bike top tube bag is ideal for stashing snacks, light valuables and electronic devices. It securely attaches to the top tube with Hypalon-reinforced Velcro straps that minimize abrasion on the frame. A one-finger zipper puller allows easy access on the move, while the full-length fully waterproof zipper safeguards contents against water and dirt when closed. The top tube bag is also padded with closed cell foam to safeguard items against impact and features an internal pocket for organization and a battery lead port for charging electronic devices on the go. Materials The Backcountry Top Tube Pack is made from Dimension-Polyant VX21, a four-layer laminated fabric originally developed for the maritime industry and our proprietary 420D nylon; a rugged fabric made to our own exacting specifications for durability and waterproofing. Designed to fit the demands of off-road riding, these materials offer full waterproofing, light weight, low stretch, and high abrasion and tear resistance. Notably, it's welded together at the seams, creating a watertight seal that ensures the saddle bag remains completely waterproof. Care Hand wash, using a mild diluted soap if necessary. Afterwards, let it air dry. Do not machine wash, machine dry, or iron. Features - Fully waterproof two-way zipper - Protected cable port - Slim-line design to avoid knee rub - One-finger zipper puller for easy access - Reflective graphics for enhanced visibility - Ultra-durable, lightweight body fabric

Precision component screwdriver machined to exact standards to ensure a perfect fit on compatible component fasteners. Featuring an ergonomic, CNC machined and hard anodized 6061 aluminum handle.

Clean out or restore damaged threads in crank arms with Park Tool's Pedal Taps. They're sold as a set of right and left hand threads. Made of high carbon steel, precision ground, and hardened to stay sharp, they cut easily and fit all conventional tap handles. • Includes a set of 2 taps, 9/16" x 20 tpi • Made of high carbon steel, precision ground, and hardened to stay sharp • Fits all conventional tap handles The tap drill size for a 9/16-inch x 20 tpi thread is nominally 33/64-inch.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek's 40-Series headsets. • Technical Description: EC34/28.6/H16/K • Top Type: EC - External Cup • Top Head Tube Inside Dia.: 33.95mm • Stem Clamp Dia.: 28.6mm • Top Stack Height: 16mm • Top Bearing Type: Black Oxide, Sealed • Material: 6061 aluminum • Weight: 50g

An extremely nice looking full aluminum headset topcap made in one piece. Laser engraved and then black anodized for a classy black in black matte/shiny finish. - Weight: Feathery 5g

Top Tube Pack WP

- Clear phone pocket - Fits iPhone 11 - Velcro attachment to top tube and steerer tube - Velcro and zipper closure storage compartment - 19 x 10 x 9.5cm

The K-EDGE Gravity Top Cap is a great computer mount for those mountain riders that already a lot going on with the cockpit of their bikes, or just want a simple and sleek looking computer mount. The Top Cap replaces your already existing top cap with the K-EDGE Gravity top cap. Ideal position for Downhill and Enduro racing/riding, but is also a popular solution for any bike when using a smaller style computer (20, 25, 200, 500, 510, 520, 820). - CNC Machined 6061-T6 Aluminum Platform, Injection Molded Garmin Specific Co- Polymer Interface - Compatibility: All Garmin Edge® Computers including the 1030*, 1000*, 820, 810*, 800*, 510, 520, 500, 200, 25, 20. Also supports the Touring, Touring Plus, Forerunner 310XT, and 910XT. (Larger EDGE computers such as 800, 810, 1000, 1030 may interfere with very steep, upright, stem angles.) - Made in Boise, Idaho, USA. - Lifetime Guarantee against material or manufacture defects. Damages due to abuse or crashing excluded.

Cell Phone Top Tube Bag - Replaceable Cover (Lt-Stm4Rt) - Large Secondary Pocket - Secure Three Strap Design - Touch Screen Capable Replacement Cover - Cell Phone Cover Will Fit Up To Iphone 6+™ - Size: 7” X 4” X 3.75” - 105 Cubic Inches

7-piece tapping drill bit set in a stable plastic box for the cutting of metric threads. The hexagonal bit shaft ensures very good power transfer. The finely-tuned material elasticity makes for great durability. Perfect chip removal and a low tilt risk. The Rapidaptor ensures rapid bit change without any extra tools. - Ideal for mobile repair and assembly work - Rapidaptor holder for rapid bit change - 1/4" drive suitable for power screwdrivers - Rapidaptor universal holder, non-magnetic, and tapping drill bits with 1/4" drive - In practical and robust plastic box

Park Tool's 692 Left-Hand Bottom Bracket Tap is a 1.370" x 24 TPI replacement tap for the BTS-1 Bottom Bracket Tap Set. This tap is used on the drive side (right side) of the bike. This side of the bottom bracket uses a counter-clockwise or left-hand thread. Note: It is very important to have sharp and accurate cutting tools for effective tapping and thread-chasing. Using an excessively worn or damaged tap can cause permanent damage to the frame and/or bottom bracket.

- 500WH. - The top pull functionality is easy to access and remove from the E-bike. - Offers two possibilities for charging: on the E-bike or off the E-bike. - The weight of this EnergyPak is 3.2kg. - Includes side cover. - 40 cells. - Maximum charging current: 4A.

Keep your snacks, camera, or phone close at hand in Giant's Waterproof Top Tube Bag. It features welded seams and TPU-laminated fabric to completely seal out the elements. Velcro straps let you mount it quickly and easily to your bike.

Thule's Round Trip Case Rack Mounting Kit lets you easily mount your Round Trip hardshell bicycle case to your Thule roof rack (case and rack sold separately). The kit includes two heavy-duty load straps, protective rubber buckle bumpers, and weather stripping to seal your rack case against the elements.

Replacement top caps for various RockShox suspension forks. -32mm steel upper tubes only

Park's Tire and Tube Repair Kit is a riding essential. It features Park’s glueless Super Patch Kit and strong nylon Tire Levers for quick and easy flat repairs. The kit comes with 3 levers, 6 patches in a small container, and a piece of sandpaper (for roughing the tube to prepare it for patching).

The Top Tube Mount places your computer front and center on the top tube of Gravel, MTB, and Adventure Bikes with preset mounting positions. - Compatible with all Garmin cycling computers - Multi-mount positions - Garmin approved insert protects the computer body tabs in the event of a crash - All hardware included - CNC machined in Boise, Idaho USA - Made in USA - Lifetime warranty

Giro's lightweight Flynt Tri is contoured for a women’s-specific fit and built with details that make the difference for triathletes. A wide throat opening and broad adjustable straps create a precision fit that isn’t restrictive, and loop heel pulls make for fast, easy transitions to the bike. The engineered nylon outsoles have a low stack height, creating a direct connection to your pedals for a sure, efficient stroke.

- Top-mounted gauge - AutoHead technology - V-shaped rubber padded handle - Durable and steady stainless steel barrel and base - Over-sized 3.5" analog gauge with air-bleed button - Portable tubeless accessories stored in handle