Your Search: "Cane Creek"

Replacement seals for servicing Cane Creek rear shocks.

Compression ring fits above the upper bearing in a Cane Creek headset to ensure vertical and horizontal compression is optimal. - Compatible with 41mm and 42mm OD upper bearings

The Ancora Expansion Plug is designed for use with carbon steerer tubes. Machined Aluminum expansion wedges paired with a knurled sleeve ensure a secure fit with the correct preload amount. - Accepts any standard preload bolt and top cap (sold separately) - Insertion length: 46mm - Contact surface length: 38mm

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek LT G4 Elastomer Insert - Medium

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek LT G4 Elastomer Insert - Firm

Air Spring Volume Reduction Kit - Cane Creek Kitsuma 5mm Air Stroke/Volume Reducer

Replacement inserts for Thudbuster G4 suspension seatposts. - Cane Creek LT G4 Elastomer Insert - X-Soft

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk+ Elastomer 7 - 70 Durometer, Firm

Air Spring Volume Reduction Kit - Cane Creek DBAir IL Volume Reduction Spacer Kit

Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk+ Elastomer 5 - 60 Durometer, Medium

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

40-Series Bearing - Compatible with 110-, 40-, and 10-Series headsets

Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk Elastomer 3 - 50 Durometer, Soft

Elastomers are designed for use with eeSilk or eeSilk+ seatposts, featuring different durometers that provide different levels of comfort. - Cane Creek eeSilk+ Elastomer 1 - 40 Durometer, X-Soft

Rebuild kits come with everything you need to service moving parts on a Cane Creek Thudbuster suspension seatpost.

Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve. - Springs feature the progressiveness and ramp-up that hard-charging riders demand - Designed for use with Cane Creek Coil shocks - Progression begins at 50% into the stroke of the spring - Crafted from high-performance spring steel - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks

Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve. - Springs feature the progressiveness and ramp-up that hard-charging riders demand - Designed for use with Cane Creek Coil shocks - Progression begins at 50% into the stroke of the spring - Crafted from high-performance spring steel - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor

Cane Creek Progressive Rate VALT coil springs are designed to provide riders with a true rise-in-rate spring curve. - Springs feature the progressiveness and ramp-up that hard-charging riders demand - Designed for use with Cane Creek Coil shocks - Progression begins at 50% into the stroke of the spring - Crafted from high-performance spring steel - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor

A higher quality spring greatly improves the performance of your coil shock. VALT springs from Cane Creek are much lighter than traditional steel springs while pushing the boundaries of performance and durability. - Inner diameter of 36.5mm is compatible with all Cane Creek coil shocks - Also compatible with Manitou, Marzocchi, XFusion, ELKA/MRP, BOS and DSP - Compatible with Fox coil shocks with required spring clip adaptor

Cane Creek is proud to introduce an ultra-premium computer mount that is intuitive and easy to use. The Cane Creek Computer Mount is incredibly modular with 4 mounting orientations, several angle adjustments and compatibility to run an accessory mount. Every computer mount comes with a Garmin and Wahoo adapter and ability to run an accessory mount. The accessory mount is sold separately and has compatibility to run lights or a camera. Cane Creek's Computer Mount is made with 6061CNC Aluminum and Stainless Steel Black bolts.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

Cane Creek ZN40-Bearing 41.8mm 45 x 45 Zinc, Each from Cane Creek.

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Super-smooth steering, quality materials, cutting-edge design and serious durability are all hallmarks of Cane Creek headsets. The 40 Series has light, tough, and beautiful machined 6061 T6-aluminum cups that are internally relieved for even more gram shaving. You also get Cane Creek's corrosion-resistant black-oxide sealed bearings and quality seals throughout to keep the grease in and the dirt out, including Cane Creek's Clip Seal that completely seals the top assembly.

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

Thudbuster 3G Elastomer

Replacement elastomers for Thudbuster LT suspension seatposts allow the rider to tune for weight.

The Cane Creek Helm MKII Air Suspension Fork features an upgraded damper design for increased support and control and a redesigned air spring that allows for increased air volume for better traction and suppleness. - D-Loc 15mm bolt-on thru-axle

The Cane Creek Helm MKII Coil Suspension Fork features an upgraded damper design for increased support and control. - Compression and midvalve circuit offer increased support and control - SKF oil seal head cartridge and wiper seals are low friction - Damping features include: high speed compression, low speed compression, low speed rebound - Adjustment options include: high speed compression (10 positions), low speed compression (17 positions), low speed rebound (10 positions), indexed travel adjust system, spring pre-load adjust - Lightweight coil spring - 55 lb Lightweight Coil Spring included from factory

The performance of your shock is directly related to the quality of your spring. VALT springs offer a significant weight reduction over standard steel springs. Riders can enjoy the performance benefits of coil shocks without the weight penalty.

Thudbuster 3G Elastomer

The performance of your shock is directly related to the quality of your spring. VALT springs offer a significant weight reduction over standard steel springs. Riders can enjoy the performance benefits of coil shocks without the weight penalty.

The performance of your shock is directly related to the quality of your spring. VALT springs offer a significant weight reduction over standard steel springs. Riders can enjoy the performance benefits of coil shocks without the weight penalty.

Installation of air volume reducers for Cane Creek shocks make the spring rate more progressive. - Spacers can be cut to fine-tune spring curve

The 40-Series is the workhorse of Cane Creek's headset line-up. Representing the balance of performance, durability and value, the series incorporates all the features necessary for a robust, lightweight, long-lasting headset. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed black oxide bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - Steel crown race with integrated seals - Interlok spacer compatible - Compatible with tapered 1-1/8" to 1-1/2" steerer tubes, or straight 1-1/8" steerers with a conversion crown race (sold separately)

Preload assembly from Cane Creek.

Service kit for Cane Creek suspension forks.

110 Series ZS62 Bottom headset from Cane Creek.

Cane Creek crown races are interchangeable between headset series.

eeSilk Stem is a fatigue-reducing compliance stem that noticeably reduces vibrations on variable surfaces. With up to 20mm of tunable compliance, an easy single bolt external elastomer change and a soft/firm compliance switch – the eeSilk Stem makes any road, no matter the terrain, smoother. - Weight: 225g - 235g - Angle: -6° (only) - Stack Height: 49mm - Stem Clamp: 31.8mm

Performance suspension seatposts designed to add comfort and compliance to any bike without adding unnecessary weight. With 35mm of travel, the eeSilk+ is a suspension seatpost designed to noticeably soften any gravel or mixed-surface road. These posts make great enhancements to gravel or mixed surface bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately - Travel: 35mm - Length: 387mm - Weight: 373g (27.2mm); 378g (31.6mm) - Max Rider Weight: 250lbs - Offset: 12mm - Minimum Extension: 80mm - Maximum Extension: 287mm

IS47-IS41 Headset Converter

Allows safe installation and removal of Cane Creek Double Barrel bushings.

Cane Creek headsets with Hellbender stainless steel bearings with increased sealing elements and more grease in relation to the comparable 110 bearing. - Designed to bridge the gap between the 40-series and 110-series headsets

Backed by a 110-year warranty and constructed in Fletcher, NC, the 110-Series headset is designed with no compromises in quality, durability, or finish quality. Zero stack uppers press into head tube with very little stack height. Lowers are either zero stack or external cup. - Sealed stainless steel bearings - Carbon-friendy compression ring captured in top cover, keeping shims in place - 7075 T-6 aluminum cups machined in Fletcher, NC - Aluminum dual seal crown race protects lower bearing - Interlok spacer compatible - 110 year warranty

Performance suspension seatposts designed to add comfort and compliance to any bike without adding unnecessary weight. With 35mm of travel, the eeSilk+ is a suspension seatpost designed to noticeably soften any gravel or mixed-surface road. These posts make great enhancements to gravel or mixed surface bikes by reducing the chatter transmitted from the surface to the rider and can be tuned to rider weight through a simple elastomer change. #5 elastomer comes pre-installed, other weight elastomers sold separately - Travel: 35mm - Length: 362mm - Weight: 323g (27.2mm), 333g (31.6mm) - Max Rider Weight: 250lbs - Offset: 12mm - Minimum Extension: 80mm - Maximum Extension: 287mm

HELM Coil - Main Spring - 45lbs/in from Cane Creek.

HELM Coil - Main Spring - 35lbs/in from Cane Creek.

HELM Coil - Main Spring - 55lbs/in from Cane Creek.

Cane Creek's 10 Series has light, tough, and beautiful machined 6061 T6-aluminum cups, Cane Creek's corrosion-resistant black-oxide angular-contact bearings and quality seals throughout to keep the grease in and the dirt out. • Technical Description: EC49/40/H12/K • Bottom Type: EC - External Cup • Bottom Head Tube Inside Dia.: 49.61mm • Crown Race Seat Dia.: 39.79mm • Crown Race Type: Polymer • Bottom Stack Height: 12mm • Bottom Bearing Type: Black Oxide • Material: 6061 aluminum • Weight: 76.57g

This is the Bottom for the Cane Creek 40 Series ZeroStack headset. Please contact us if you have any questions about which parts are correct for your headset.

Cane Creek eeBarKeep bar end plugs weigh in at only 6 grams each and were designed with both flat and drop-bar applications in mind. - Material: Aluminum