Your Search: "Campagnolo"

Zipp's Tangente Platinum Pro Evo Brake Pads are made for wheels with carbon braking surfaces. These fine pads provide confident, smooth braking power in all conditions and they are specially made for long life. They have a large surface area for maximum stopping power and deep grooves to shed water from the rim and ensure the Evos grip great even when it's wet. These stoppers are also thin so they'll work nicely on time trial and triathlon bicycles with integrated brakes and tight clearances.

Freehub bodies for Zipp Cognition hubs.

- Freehub for Cognition V2 hubs

- Lowest resistance hybrid ceramic (ceramic balls and steel cages) available - Measurable wattage savings between 1.5 and 9 watts per bearing set, depending on the level and condition of your existing bearings - Kits include Freehub body with CeramicSpeed

- 10-speed: stainless steel 6.1mm wide no tool chain connector for Shimano and Campagnolo - 9-speed: stainless steel 6.5mm wide no tool chain connector for Wippermann chains - 6-8 speed: stainless steel 6.8mm wide no tool chain connector for Wippermann chains

Use this double-sided socket tool for installing and removing both 48.5mm and 44mm 16-notch bottom bracket cups. Socket is machined for 1/2-inch drive, but a 3/8-inch to 1/2-inch adapter is included so you can use it with 3/8-inch drive torque wrenches. - Compatible with all Wheels Manufacturing bottom brackets that have 48.5mm or 44mm, 16-notch spline patterns - Also compatible with FSA MegaEVO BB cups, Shimano, SRAM/Truvativ, Campagnolo Ultra Torque, and FSA - Machined 6061 aluminum - Anodized red

- The wrench is used to remove and install Shimano Hollowtech II, Campagnolo Ultra-Torque and Power Torque, Race Face, FSA, SRAM, Truvativ, Chris King bottom brackets - Small wrench is included for removal and installation of Shimano plastic bolts that are used on the Hollowtech II cranksets - Material: premium flex plus carbon steel, Surface finish: chrome plated according to ISO1456:2009

Topeak's Hexus X is an award-winning, 21-function multi-tool with updated design to store T15, T25, and 8mm hex tool bits inside. Tire levers are securely side-mounted, and have additional tools built into them. The Hexus X is an excellent choice for both road and mountain bike riders. - Allen wrenches: 2 / 2.5 / 3 / 4 (2 pcs) / 5 / 6 / 8mm - Torx bits: T15 / T25 / T30 - #2 Phillips screwdriver - 14G / 15G spoke wrenches - 2 engineering grade plastic tire levers - Presta Valve Core Tool - Chromoly steel chain tool - Steel wire chain hook - Weight: 170g *Chain tool is compatible with single and multi-speed chains up to 12-speed except Campagnolo 11-speed hollow-pin chains

This freehub body enables you to fit a Campagnolo cassette on the NEO Smart and the FLUX Smart. Suitable for 9 through 11 speed Campagnolo cassettes. How to place the Campagnolo Body: 1. Remove the cap with a 5-millimeter Allen key. 2. Replace the Shimano/SRAM body with the Campagnolo body. 3. Place the cap on the Campagnolo body and tighten with a 5-millimeter Allen key.

Ideal pad for everyday use. Compound works well on all aluminum rims and well suited for softer alloys, including magnesium. Fits: - SRAM Road - Shimano Road - Campagnolo Potenza 2016 - Campagnolo Athena 2016 - Campagnolo Veloce 2016 - Campagnolo Centaur 2017

High performance compound for alloy wheels. Improved power and modulation with excellent wet weather stopping power. Fits: - SRAM Road - Shimano Road - Campagnolo Potenza 2016 - Campagnolo Athena 2016 - Campagnolo Veloce 2016 - Campagnolo Centaur 2017

1/2" Dr. bit socket H10 for Campagnolo® B.B. 10mm bolt

The new Gen 3 single-sided Stages Power L meter is built onto a non-drive-side Campagnolo Record 12s crank arm. Tour Proven Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world's best product-proving ground, then Stages Power is proven as the world's best power meter. Active Temperature Compensation as Standard Equipment Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process, ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - +/- 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer-based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need to connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications: - Accuracy: +/- 1.5% - Power meter housing: low-profile design with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single-sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 Sizing Options: - Lengths: 170mm, 172.5mm, 175mm Compatibility: This Campagnolo Record 12 Speed based Stages Power meter non-drive-side crank arm is only meant for use paired with a drive-side Campagnolo Record or Chorus crank arm. It will NOT mate with a Campagnolo Super Record crank arm. - Frame Compatibility: Most frames - Device Compatibility: ANT+, Bluetooth Smart Ready - Software Compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center, and others

The new Gen 3 single-sided Stages Power L meter is built onto a non-drive-side Campagnolo Super Record crank arm. Tour Proven Stages Power has carried riders to three consecutive Tour de France victories, plus many more world and national championships. If you believe racing provides the world's best product-proving ground, then Stages Power is proven as the world's best power meter. Active Temperature Compensation as Standard Equipment Consistency of measurement is the most important feature of a power meter. Stages Power was the first meter to make temperature compensation an automatic process, ensuring accurate readings no matter the environmental conditions. Individual meter calibration for the most accurate results. Stages Power meters are calibrated individually to ensure a +/- 1.5% accuracy level. Individual calibration means that you can trust the data produced by our system. Additional features: - +/- 1.5 % accuracy in all conditions - Active temperature compensation - Accelerometer-based cadence measurement - Wirelessly upgradable firmware - LED indicator displays battery level at start up (with no need to connect to an app) and confirms successful zero reset - Updated accelerometer and addition of gyroscope for improved cadence resolution - Upgraded BLE and ANT+ radios offer a 6X improvement of data transmission strength Specifications: - Accuracy: +/- 1.5% - Power meter housing: low-profile design with robust door interface - Weight: Only adds 15g to base crank arm - Battery Life: 200+ hours (coin cell: CR2032) when used as a single-sided meter - Power range (Watts): 0 to 5000 - Cadence range (rpm): 10-220 - Water resistance rating: IPX7 Sizing Options: - Lengths: 170mm, 172.5mm, 175mm Compatibility: This Campagnolo Record 12 Speed based Stages Power meter non-drive-side crank arm is only meant for use paired with a drive-side Campagnolo Super Record 12s crank arm. - Frame Compatibility: Most frames - Device Compatibility: ANT+, Bluetooth Smart Ready - Software Compatibility: Stages Link, Training Peaks, Strava, Garmin Training Center, and others

Specialized's Expert Alloy Shallow Bend Handlebar offers the same ergonomic benefits as the S-Works version, delivering a strong and affordable bar with no compromise. - Premium butted aluminum, high-strength design - Ergonomic top perch alleviates pressure on hands; smooth transitions for fit & comfort - Shallow bend drop design: 123mm drop x 75mm reach - UCI legal, compatible with Shimano, SRAM, and Campagnolo controls - Front of bar optimized for dual-cable routing

A high performance bar, ideal for smaller hands or for riders that spend the majority of their time climbing. An ergonomic top perch with smooth transitions alleviate pressure on hands and greatly improve comfort. - Bar Width (center-to-center): 36/38/40/42/44cm - Clamp Diameter: Oversized 31.8mm - Ergonomic top perch alleviates pressure on hands. - FACT carbon construction offers an optimized blend of durability and light weight. - Front of bar optimized for dual-cable routing. - Shallow Bend Drop: 123mm drop x 75mm reach - Shallow bend drop design. - UCI legal, compatible with Shimano, SRAM, and Campagnolo controls. - Weight: 200g (42cm)

Profile Design's Campagnolo Freehub Body is the part you need to replace the Shimano/SRAM-compatible freehub body that comes stock on your Profile Design Altair or Armada wheels. Once installed on your wheel, the Campagnolo body lets you run Campy 9-, 10-, and 11-speed cassettes (sold separately).

- UPDATED for 2021 - Ergonomic design provides efficiency, comfort, and safety. - Updated bridge geometry fits modern chains including SRAM 12 Speed Road. Visit pedros.com/chainfit for compatibility info. - Patented Retracting Pin Guide (RPG) provides superior functionality and reliability. - Includes peening bit and backer for Campagnolo chain installation.

Park's Bottom Bracket/Cassette Tool for Campagnolo is an indispensable tool for your Campagnolo drivetrain. It's for installing and removing all Record, Chorus, Centaur and Athena bottom brackets, and all Campagnolo cassette lockrings.

The BBT-4 is made for the installation and removal of 6-notch SC-S and AC-H cartridge cups used on sealed cartridge bottom brackets. These bottom brackets have six notches around the outside of each cup. The handle of the BBT-4 is vinyl coated for comfort. The major diameter of the tool is nominally 44mm, and the minor diameter 38mm. The BBT-4 is compatible with the following sealed cartridge bottom brackets: • Campagnolo Veloce • Xenon • Mirage • Daytona • Avanti

Park Tool's SW-11 is a forged, double-ended spoke wrench designed to fit select Campagnolo wheels. Precision machined, plated and vinyl dipped for comfort and long life. It fits Campagnolo 5.5mm and 6.0mm hex spoke nipples.

The Bottom Bracket Wrench removes and installs Shimano Hollowtech II, Race Face X-type, FSA MegaExo, Campagnolo Ultra-Torque and TruVativ Giga X-pipe bottom brackets. Laser cut for a precise fit, one end of the BBT-9 securely engages the 16 cup notches, while the other end engages the 8 internal splines of the crankarm adjustment cap.

A professional quality shop chain tool that works on 5-speed to 12-speed Road and Mountain Bike derailleur chains*, including SRAM AXS 12 speed, as well as 1/8-inch and 3/16-inch chains. The CT-3.3 features an adjustable locating shelf so it works on any width chain to remove and install chain rivets. Built to last and easy to use, the CT-3.3 features a comfortable handle, investment cast steel body and replaceable driving pin (#CTP). *The CT-3.3 will install, but not peen, Campagnolo 11 and 12-speed chain rivets. - Comfortable T-handle - Replaceable driving pin (CTP) - Investment cast steel body - Adjustable locating shelf

The MTC-40 features a super strong, composite, multi-position handle, with hardened and plated tools and smooth ergonomic operation. Lightweight, compact, and perfect to carry along. - 2.5, 3, 4, 5, 6 and 8mm hex wrenches - T25 & T30 Torx compatible driver - Combo cross/straight tip screwdriver - 5- to 12-speed compatible chain tool* - Rotor straightener - CO2 cartridge inflator adaptor - Bottle opener - Key ring holder - Weight: 217g (7.65 ounces) *The MTC-40 chain tool will not peen Campagnolo 11-speed chain rivets (see CT-4.3 or CT-6.3)

DS85 twist shifters are classic and simple to use, and give the ability to repair a variety of flat bar bikes and freshen their looks. - Include shift cables - Requires Campagnolo cable

- Made of anodized and heat treated 7075 T6 aluminum - 10/11 compatible (Shimano 10/11, Campy 10/11, SRAM 10) - Recommended chain: KMC, Shimano or Campagnolo

- Replacement pads for Campagnolo Super Record 11-speed groups - Black: standard compound designed for dry condition riding - Salmon: aggressive compound for wet weather conditions - Dual: combination of Salmon and Black compounds for more controlled, smoother stopping - Triple: Kool-Stop's most aggressive compound combination for controlled braking in all conditions - Carbon - Kool-Stop's original carbon compound which works great for most carbon wheels but will wear quicker on fast steep descents. - Carbon 2: updated formula for carbon rims, withstands steep descents with reduced wear

The Campi Super Record Holder is a forged aluminum holder with dual pivot adjustment that houses Kool Stop's Dual Compound pads. These pads feature a rear set screw for easy pain free pad replacements. Comes with extra set of hardware to install on older Campi systems. Features: - Aluminum Holder - Water Grooves - Dual Pivot Adjustment - Dual Compound - Rear set screw - Additional hardware for older Campi systems Specifications: - Weight per pair: 34.6 grams - Overall length: 56.3mm - Pad contact width: 8.9mm

KMC Missing Link connectors are for use on new chains or to keep in your seat bag for an emergency repairs. - Compatible with Campagnolo 10-speed chains

- Compatible with Shimano, SRAM, Campagnolo and KMC 11 speed chains - DLC Coated - Non-reusable - Opening Tool Required - Card of 2 pairs