Filter By:

  • Show More Brands
  • Show Fewer Brands
  • Show More Sizes
  • Show Fewer Sizes

Lubes/Cleaners

Finish Line Wax Lubricant (32-ounce jug)
$54.99
Finish Line's Wax Lubricant is a unique formulation that features DuPont's Krytox, a highly advanced, thermally stable lubricant. Its specialized paraffin waxes set up dry and hard to repel grit and grime so your drivetrain runs silky-smooth and stays clean. Another nice feature is that, as parts get dirty, the wax layers can shed, which helps keep the chain and components cleaner.
Finish Line Speed Degreaser
$17.99
- A super duty cleaner that strips the toughest residues, Including brake rotor surface grime - Dries fast with no oily residue left behind - Exceeds all federal v.O.C. And california carb regulations - Law prohibits orm-D materials from shipping by air
Finish Line Grease
$89.99
Finish Line Premium Grease is Super Slick and made with Teflon fluoropolymers. This 100% synthetic oil grease coats ball bearings and races, preventing wear and distortion in headsets and bottom brackets, even in brutal down hill racing and over extended periods of time. The slickest, toughest bicycle grease available. No matter how hard or long you ride, Finish Line Premium Grease will provide the lubrication your bearings require. New “functional” thickener totally prevents rust and corrosion (even in saltwater).
Finish Line Wax Lube (1 Gallon Bottle)
$159.99
Finish Line WAX Lubricant goes on wet, but dries to a hard, dry, super-slick wax film. No oily greasy film to attract or absorb dust and dirt. DuPont's metal bonding Krytox lubricating film in combination with M2 molybdenum, specialized waxes, and more, make our WAX Lube even slicker, quieter and longer lasting. WAX Lube requires more frequent application, but your drivetrain will remain nearly contaminant-free, so cleaning before relubing is not usually required. Drivetrain parts that stay this clean last longer and work better! Perfect for cyclists who value cleanliness over all else.
Finish Line Citrus Aerosol Degreaser (12-ounce)
$15.99
Finish Line Citrus Degreaser. Super strong and fast. Cuts through the toughest of carbonized grit, grease, and grime. Low surface tension for thorough penetration into all areas. 100% active, biodegradable and nontoxic.
Finish Line Wax Lube (8-ounce Bottle)
$18.99
Finish Line WAX Lubricant goes on wet, but dries to a hard, dry, super-slick wax film. No oily greasy film to attract or absorb dust and dirt. DuPont's metal bonding Krytox® lubricating film in combination with M2 molybdenum, specialized waxes, and more, make our WAX Lube even slicker, quieter and longer lasting. WAX Lube requires more frequent application, but your drivetrain will remain nearly contaminant-free, so cleaning before relubing is not usually required. Drivetrain parts that stay this clean last longer and work better! Perfect for cyclists who value cleanliness over all else.
Finish Line Extreme Fluoro Grease (20-Gram Syringe)
$19.99
Finish Line's Extreme Fluoro Grease is made with pure DuPont fluorinated ingredients for outstanding durability and unbeatable smoothness. It's recommended for use on precision parts, especially ceramic and conventional bearings, where you need maximum protection from the elements and heat. This low-friction grease even works great on cable wires, derailleur pivots, stanchions, pedal springs and other vital moving parts.
White Lightning Easy Clean Tire Brush
$14.99
White Lightning's Easy Clean Tire Brush is the perfect solution for cleaning dirty tires. It removes tread grit, which improves traction, helps to prevent flats, and minimizes the mess when storing or transporting your bike. The adjustable Easy Clean Tire Brush fits every shape and size of tire. You can also use it wet or dry, whether you just need to knock some dirt off or really get in there and give 'er a good scrubbing.
DT Swiss Star-Ratchet Grease
$40.00
- Recommended by DT Swiss for lubrication of star-ratchets on all DT Swiss hubs. Molykote tp 42 with 5% mineral oil add mixture
Finish Line Super Bike Wash (1-Gallon Jug)
$31.99
Finish Line's Super Bike Wash quickly cleans dirt, clay, road grime and chain gunk off your bike. Five different cleaning agents work together to create a high-speed cleaning system. Three different rust and oxidation inhibitors protect metal surfaces to prevent rusting. It's safe for all bike surfaces.
Finish Line No Drip Chain Luber Kit
$21.99
Lubricating a chain is an essential, but often dreaded task. It can be time-consuming and often results in lubricant landing on the frame, wheels, braking surfaces, and the ground. Thanks to the No Drip Chain Luber every link can now be properly lubricated in seconds, without making a mess or wasting a drop.
Finish Line Ceramic Grease (1-Pound Tub)
$39.99
Finish Line's Ceramic Grease is their most advanced bearing lubrication technology. Formulated with sub-micron ceramic particles, Teflon fluoropolymer and premium non-toxic synthetic oils, it's guaranteed to optimize the performance and efficiency of bottom brackets, hubs and headset bearings. As bearings become coated with the Teflon and ceramic particles, friction and heat is dissipated. Bearings last longer and run quieter and smoother. And, it prevents rusting even when parts are exposed to salt water, and is excellent on stems, seatposts cables and threads, too.
Finish Line Chill Zone (6-Ounce Spray)
$14.99
Finish Line's Chill Zone works like magic to loosen and free rusted parts! Before discarding your rusted chain or giving up on a frozen crank bolt, a sticky derailleur, or a seized seatpost, give Chill Zone a shot. Bike parts that normally need to be replaced can be reconditioned to ride another day. Chill Zone has a special refrigerant that freezes metal as low as -50°F/-45°C contracting it and breaking the rust bond. Then Chill Zone's penetrant breaks down and flushes out the rust. With Chill Zone, most rusted parts quickly regain full functionality. Plus, it lubricates, too, so you don't need to add any.
Finish Line Chill Zone (12-Ounce Spray)
$18.99
Finish Line's Chill Zone works like magic to loosen and free rusted parts! Before discarding your rusted chain or giving up on a frozen crank bolt, a sticky derailleur, or a seized seatpost, give Chill Zone a shot. Bike parts that normally need to be replaced can be reconditioned to ride another day. Chill Zone has a special refrigerant that freezes metal as low as -50°F/-45°C contracting it and breaking the rust bond. Then Chill Zone's penetrant breaks down and flushes out the rust. With Chill Zone, most rusted parts quickly regain full functionality. Plus, it lubricates, too, so you don't need to add any.
Finish Line Mineral Oil Brake Fluid (4-Ounce Bottle)
$12.99
Finish Line's Mineral Oil Brake Fluid is high quality to provide maximum fluid life and braking power. It features a super-low viscosity to yield superior lever response and pad retraction. Plus, it won't foam up even on long, challenging downhills.
SRAM Ceramic Bearing Grease
$9.99 - $13.99
SRAM's Ceramic Bearing Grease is perfect for maintaining your SRAM components that feature ceramic bearings. This high-tech lubricant minimizes friction to maximize your performance and it keeps your SRAM components going strong year after year. Plus, the 10ml syringe container makes it easy to grease your parts, too.
Finish Line Super Bike Wash Concentrate (16-Ounce Bottle)
$12.99
Finish Line's Super Bike Wash quickly cleans dirt, mud, clay, road grime and chain gunk off your bike. Its five different cleaning agents work together to create a high-speed cleaning system. There are also three different rust and oxidation inhibitors to protect metal surfaces from rusting and corrosion. It's also safe for all bike surfaces.
Finish Line Ceramic Wet Lubricant (32-ounce Bottle)
$84.99
Ceramic WET is Finish Line’s most advanced and most effective racing lubricant. This wet-style full synthetic lubricant is enhanced with a nano-sized platelets of boron nitride and micron particles of fluoropolymer that build a ceramic coating on the frictional surfaces of parts. Ceramic WET’s extreme durability, amazing smoothness and ultimate quietness ensures maximum drivetrain efficiency. Ceramic WET can be used in all disciplines: Mountain bike, cyclo-cross, road and track racing.
Park Tool High Strength Threadlocker
$22.99
Threadlockers lock threaded assemblies and keep them from loosening. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.
Park Tool PolyLube 1000 16-Ounce
$24.99
Park's PolyLube is specifically formulated to protect bearing components. Its Polyurea grease has extremely high shear strength to protect bottom brackets, headsets, pedals and hubs. Use it on threads, seatposts, stems and cables, too. It's also safe for fork seals, and repels water.
Park Tool Grease Gun
$33.99
Use as a self-contained grease gun by using the included canister or screw the pump on to any tube of Park Tool grease, anti-seize or assembly compound. Small tip opening ensures precise placement of lube in any application.
Park Tool Adhesive Primer
$38.99
Prepares surface, accelerates curing and promotes maximum performance of Park Tool TLR-1 and TLR-2 Threadlockers as well as RC-1 Retaining Compound. Notice: Must be used on all component, fastener and carbon fiber surfaces in conjunction with threadlockers and retaining compounds that contact carbon fiber such as PF30 bottom brackets or brackets or bearings pressed into carbon fiber frames. Failure to do so could result in permanently bonded parts.
Park Tool Bio ChainBrite
$20.99
Bio ChainBrite Bicycle Chain and Component Cleaning Fluid is a 100% biodegradable, natural, plant-based degreaser formulated for use in Park's CM-5.2 Cyclone Chain Scrubber or as a general purpose degreaser. It won't harm alloy, plastic, or rubber parts. Use CB-4 full strength, do not dilute with water. Cover parts in solvent and scrub using a brush. 16-ounce bottle
Park Tool SuperGrip Carbon Assembly Compound
$19.99
Park's SuperGrip Carbon Assembly Compound is a combination of grease and tiny particles and is ideal for lubricating, protecting and tightening carbon components, like seatposts, handlebars and stems. SuperGrip solves the problem of carbon parts moving and slipping, which can happen if they are not lubed, or you apply standard grease or lube to them. It also works well with aluminum and steel components.
Zipp Bearing Grease
$15.99
Zipp's Bearing Grease is perfect for your home workshop and traveling toolbox, too. It's a quality lubricant designed to minimize friction and maximize the life of your components. And it's easy to apply with its 20ml syringe container.
SRAM Jonnisnot Shifter Grease
$16.99
SRAM'S Jonnisnot Shifter Grease is a fluorocarbon lube perfect for steel-on-composite applications and for brake and shift cables. It minimizes friction and maximizes the performance of your components. You'll love the easy-to-use 20ml syringe container, too.
Avid DOT Assembly Grease
$15.00
Keep your brakes performing at their best with Avid's Assembly Grease. They're compatible with all Avid disc brake seals. You'll get a 1-ounce jar of grease.
Tri-Flow Superior Lube
$59.99 - $239.99
- Light viscosity oil for deep penetration with teflon for durability - Law prohibits orm-D materials from shipping by air
Finish Line Ceramic Wax Lube (32-ounce Bottle)
$84.99
Finish Line’s Ceramic-WAX is an advanced wax-based lubricant featuring nano-sized platelets of ceramic boron nitride and micron particles of fluoropolymer. Ceramic WAX creates a coating with an extremely low coefficient of friction. Every time Ceramic WAX is applied, the ceramic coating is enhanced! Ceramic WAX ensures total drivetrain cleanliness without the ‘distance’ compromise that other wax lubricants require. With Finish Line Ceramic WAX there is no ‘wetness’ or stickiness on your chain or parts, so dirt or grime are not attracted or absorbed by the lubricant. By avoiding abrasive wear, parts run more smoothly and last much longer! A
Park Tool Press Fit Retaining Compound
$22.99
Fills gaps and helps retain non-threaded parts like Press-fit bottom bracket parts, sealed bearings etc. Notice: Park Tool AP-1 Adhesive Primer must be used to prep all components, fasteners and carbon fiber surfaces prior to application of Park Tool threadlockers or retaining compound. Failure to do so could result in permanently bonded parts.