Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's Standard Tubeless Kit converts standard tubed wheels to tubeless so you can reap the benefits. Everything you need to go tubeless is included. Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Races, training, group rides, gran fondos—Profile’s 58/Twenty Four Full Carbon Clinchers will be your new secret weapon. Their engineers used fluid dynamic modeling and wind tunnel testing to create a super slippery 58mm-deep by 24.5mm-wide rim for maximum free speed and slicing right through head and cross winds. Adding mph are the Sapim CX-Ray bladed spokes, which have locking nipples so they stay tight. These wing-like wheels save you massive energy on the flats and they're also light enough to rocket you up the climbs. Plus, Profile's careful hand assembly and advanced carbon layup mean rock-solid stiffness for outstanding power transfer. And, because sometimes you just have to hit the brakes, Profile includes high-tech carbon wrapping and a heat-resistant resin in its rims, plus carbon-compatible brake pads come with the wheels so you'll have more stopping power than ever. Upgrade to the 58/Twenty Fours and get ready to become a better rider.
Replacement end caps for Stan's NoTubes ZTR/3.30/3.30 Ti rear hub. They're compatible with a Type 2 hub.
Asym rims use an asymmetrical design to create a rim that evenly distributes tension, doesn’t require dishing, and makes for a faster wheel assembly. High end WT69 Alloy and an open cavity design keep Asym weights down while eyelets prolong longevity and prevent binding. Featuring a full TCS (tubeless compatible system) inner rim profile, Asym rims provide a lightweight, higher performance value-driven option that works exceptionally well with wheel building machines.
Wherever the trail leads, SRAM's Roam 30 is ready to go. The 25mm wide rims give big tires the support they deserve for outstanding cornering control, and the rims are durable enough for day-after-day sessions, yet light enough for race day. And, the Roam's great features continue with SRAM's Solo Spoke design that uses one spoke length to fit the entire wheel, and quick-release skewer and 15mm thru-axle end caps that can be interchanged without tools.
Stan's 3.30HD 20mm Hub Kit makes Stan's 3.30HD front hubs 20mm through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on.
Replacement freehub body for Stan's NoTubes 3.30R and 3.30RTi rear hubs.
This conversion kit allows you to use SRAM's 11-speed mountain cassettes on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
$120.99 - $137.99
When traction is king, go wide! SPANK Industries has been an innovator in wide rim design for over a decade, and the OOZY Trail 345 Rim is the culmination of these efforts. Boasting a 30mm inner width, the OOZY Trail 345’s design optimizes performance with the widest range of tire shapes and sizes on the market. This wider internal width improves tire spread, effectively increasing traction, without squaring tire profiles excessively, which can lead to reduced maneuverability and cornering traction. The OOZY Trail 345 Rim combines the strength of Dynamal alloy, the stiffness of Spank’s patented Oohbah reverse-well profile, and the enhanced tubeless performance of Bead Bite anti-burp rims hooks into a lightweight, trail-tuned package. - Key technologies: Bead Bite, OohBah, Dynamal Alloy - Material: MGR Dynamal Alloy - Size (in.): 27.5" / 29" - Weight (g): ±520 (27.5") / ±540 (29") - Hole Count: 32H - Inner / Outer Width (mm): 30 / 34.5 - Valve: F/V Presta - Tubeless: tubeless ready - Finish: shotpeen anodized, laser logos - ERD (mm++): 554 (27.5") / 591 (29") - ETRTO (mm): 584x30 (27.5") / 622x30 (29") - All Technologies: Bead Bite, OohBah, Bead Nip, Dynamal Alloy, MGR - Discipline: trail
- Replaces freehub body on current Cobalt or Iodine wheels with SRAM XD compatible body
9/15/20mm conversion kit for current generation front hubs - Cobalt endcaps – These kits convert current generation Cobalt front wheels to 9/15mm thru-axle. - Iodine/Opium endcaps - These kits convert current generation Iodine and Opium front wheels to 9/15/20mm thru-axle. - Conversion: 9/15/20mm - Cobalt weight: 26g (9mm) / 16g (15mm) - Iodine/Opium weight: 28g (9mm) / 18g (15mm) / 23g (20mm)
Converts cobalt/iodine/opium hubs from 142 to 135 qr spacing. Rear endcaps kit – this kit converts any crankbrothers 2, 3, or 11 wheelset from 142×12mm thruaxle rear spacing to 135×9mm qr rear spacing. Conversion: 135x9 mm Weight: 23g per pair
$24.99 - $43.99
Make your WTB rims air tight and ready for tubeless use with WTB's TCS Rim Tape. This tape covers the spoke holes and can be used as a lightweight rim tape in any rim. Available in 11-meter (covers 5 rims) and 55-meter rolls (covers 27 rims).
Replacement Shimano/SRAM steel freehub body for Stan's NoTubes 3.30 disc or HD disc rear hubs.
Replacement Shimano/SRAM freehub body for Stan's NoTubes 3.30 rear hubs.
Replacement Shimano/SRAM steel freehub body for Stan's NoTubes 3.30HD rear hubs.
$24.99 - $29.99
Stan's 3.30/3.30Ti Hub Kit converts Stan's 3.30 front hubs from quick-release to through-axle compatible. Installation is easy—just pull the old ones off and put the new ones on. Conversion kits available in 12mm and 15mm.
A great match for your PowerTap rear hub, PowerTap's Front Hub is made of light, reliable cold-forged aluminum and boasts silky-smooth sealed bearings and a durable axle. This hub does not measure power.
This conversion kit allows you to use SRAM's 11-speed mountain cassette on your Stan's NoTubes wheels. Each kit includes an XD freehub, spacer, drive side end cap, and three sealed bearings.
MICHELIN's Country Race'R is the perfect choice for hardpack surfaces and fast courses. It has shorter knobs in the center so it rolls fast, taller knobs on the sides that great grip in the corners and it's built for excellent durability and puncture resistance too.
From cranking up steep trails to adrenaline-pumping descents, SRAM's Rise 60 wheels are the perfect balance of low weight, quick engagement and speed-boosting stiffness. From XC trails to endurance rides to all-mountain shredding, the light, strong carbon rims, Sapim CX-Ray spokes and aluminum hubs work together for corner-ripping confidence, effortless climbing and slingshot acceleration. Plus, they're tubeless compatible for increased traction, flat-resistance and lower weight. All things every bike can benefit from. Every wheel connects you to the ground, only a few let you Rise to new heights.
Fast climbs and fast descents, from sun up until sundown, are the norm on SRAM's Roam 50 Wheels. They boast a dedicated balance of low-weight, strength, and width to excel on a wide variety of XC and trail-bike terrain. The 25mm wide rims give big tires the support they deserve for outstanding cornering control, and the rims are durable enough for day-after-day sessions, yet light enough for race day. Ditch the tubes with full UST tubeless compatibility, and reap the rewards of excellent traction, control, and fewer flats. And, the Roams' great features continue with their Solo Spoke design that uses one spoke length to fit the entire wheel and quick-release skewer and 15mm end caps that can be interchanged without tools.
$1,007.99 - $1,059.99
Get some extra speed in criteriums, time trials, and triathlons on Profile's 38/TwentyFour wheels. Their 38mm-deep carbon rims slice through the wind, yet are not so deep that they get pushed around in crosswinds. For extra stiffness, hi-flange hubs are paired with handbuilt construction, and bladed spokes.
Stan's Alpha Rim Strip are specifically designed to fit Stan's Alpha 340 and Alpha 400 rims. Going tubeless allows you to run low tire pressure for better traction while drastically reducing the chances of a flat. Stan's rim strips create a tight seal with the tire bead, reducing the instances of "burping." Plus, you won't miss dealing with flat tires and you'll save money on tubes!
Zipp's Firecrest 303s give you the speed to take the hole shot and the control to maintain it. Built on ultra rigid 45mm-deep carbon rims, they slice through the mud, sand, and wind with predatory force, always hungry for the win. At 28.5mm-wide, the rims offer an extra-wide platform so you can run lower tire pressures for diminished rolling resistance and better grip in the corners, all without the fear of flatting. Disc-compatibility reigns in an era of smooth, dialed braking control, which translates to more speed and less wasted energy. Zipp’s stiff hubs and Sapim CX-Ray spokes provide the finishing touches.
WTB's KOM i23 Rim is ultra light and extra wide so you can be first to the top and ready to turn it around and rip down while your buddies are still looking for their lungs. It's made from WTB's exclusive WT69 aluminum and features a 23mm width that's great for big all-mountain rubber. Plus, it boasts WTB's Tubeless Compatible System which means with their tubeless-ready rim strip (sold separately), you can run a tubeless-compatible tire for easy conversions, minimal weight and maximum traction out on the trail. Whoever said it ain’t easy being king… was slow.
SRAM's X0 Hub stops at nothing for a lightweight hub that's worthy to wear the X0 name. Ultra-durable, high-precision Speedball bearings spin smoothly in all conditions and the tapered aluminum axle delivers strength with minimal weight. It's equipped with standard 6-bolt rotor mounts and is convertible from quick-release to 15mm to 20mm through-axles.
The 350 road hub delivers the amazing performance you've come to expect from DT Swiss at an incredible value. Fast and reliable, these hubs will roll for thousands of nearly frictionless miles. Plus, DT's legendary Ratchet System ensures precise engagement no matter how hard you stomp on the pedals.
Unleash an almighty sprint or solo off the front with Zipp’s 404s. They're built with 58mm-deep, 26.5mm-wide dimpled Firecrest rims and are some of the stiffest, most aerodynamic wheels available. 28 front and rear spokes are laced to Zipp’s stiff Track hubs with overisze axles, ensuring maximum lateral and torsional stiffness. Zipp’s Spoke Hole Impact Forming Technology boosts wheel strength so that you can lay down even more power in your pursuit of podium time.
During races, the people who pedal the least generally win the most. Profile’s 78/Twenty Four Full Carbon Clinchers are invisible to the wind and carry your speed to make this happen. Profile's Fluid dynamic modeling and wind tunnel testing created a 78mm-deep by 24.5mm-wide aero rim profile that excels in all wind conditions. Plus, there are Sapim CX-Ray bladed spokes for more free speed, which have locking nipples so the wheel remains tight and true, too. These speedy hoops are carefully layed up and built by hand for awesome stiffness and amazing power transfer. And, because even the fastest racers have to slow down now and then, Profile includes advanced carbon wrapping and a heat-resistant resin in its rims, plus carbon-compatible brake pads come with the wheels so you have maximum speed control. Give your performance a turbo boost by upgrading to the 78/Twenty Fours soon.
Page 1 of 15 Next page