Skip to main content

Filter By:

  • Show More Model Years
  • Show Fewer Model Years

Derailleurs

Shimano Ultegra R8050 Di2 Shadow Rear Derailleur
$369.99 - $389.99
Shimano Ultegra Di2 Shadow rear derailleur. - Sleek integrated appearance - New low-profile design - Shimano Shadow RD - Race endurance - Optimized slant angle - Maintain race concentration with more intuitive shift control - System communication with front derailleur - Shimano Synchronized Shift - Wide compatibility - Short cage covers: 11-25T to 11-30T - Medium cage covers: 11-28T to 11-34T - Average Weight: 242 grams (SS type), 249 grams (GS type)
SRAM GX 2x10 Front Derailleur (Low Direct-mount, Dual-pull)
$45.00 - $51.99
SRAM's low-profile GX 2x10 Front Derailleur was designed specifically around SRAM X-GLIDE shifting. This stiff, strong front derailleur provides, crisp, precise action for fast, smooth and reliable shifting season in and season out.
Shimano Deore M6000 Shadow+ Rear Derailleur
$139.99 - $144.99
Shimano's Deore Shadow+ Rear Derailleur is loaded with mountain bike technology. The Shadow design tucks the rear derailleur closer in to the wheel, reducing damage from rocks, roots, and trail obstacles. When it comes to gear changes, Shimano's Dyna-Sys supplies consistent, smooth shifting across the entire cassette. And the Shadow+ clutch maximizes chain control by virtually eliminating chain slap and excess noise with its integrated cage-tensioning clutch. - Medium Cage (for 2x10 drivetrains) - Long Cage (for 3x10 drivetrains) - For use with Shimano 10-speed drivetrains - High-efficiency drivetrain for aggressive trail riding - Optimized gear combinations and ratios for trail riding - Maximum chain wrap capacity: 41T (medium cage)/43T (long cage) - Largest cog: 42T (medium cage)/36T (long cage) - Compatible with wide range cassette - Silent and stable for technical trail riding - Improved stability and chain retention longevity - Light shifting effort - OPTISLICK cable - Smooth and precise shifting - DYNA-SYS compatible system
Shimano Ultegra R8050 Di2 Front Derailleur
$359.99
Shimano Ultegra R8050 Di2 front derailleur. - Quick and smooth front shifting under high pedaling torque - Programmed control of chain guide - Shimano Synchronized shift - Full and semi synchronized shifting program - Redesigned to fit wider gear pitch without sacrificing shifting - Shorter length of rear center (410mm) with O.L.D. 135mm - System communication with rear derailleur, Programmed control of chainguide works for minimal chance of chain drop - Top Gear Teeth: 46-53T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Average Weight: 132 grams
Shimano Altus FD-M313 Front Derailleur
$29.99
Altus wide link 7/8-speed compatible dual-pull multi-fit front derailleur for recreational off-road use. - Compact conventional swing design - Low-friction wide linkage reduces shifting effort and increases rigidity - Dual-pull design allows it to be used with top or bottom cable routing - Multi clamp band is compatible with all frame dimensions - 66-69 degree chainstay to seat tube angle range - For outer chainring size from 42 to 48 tooth, total capacity 20 teeth - Compatible with 7- or 8-speed drivetrains
Shimano 105 Rear Derailleur (Short Cage)
$69.99 - $94.99
Shimano's 105 Rear Derailleur delivers high-end function with upscale looks. With a body of light, durable cold-forged aluminum in Shimano's wide-pivot design with their light-action spring, rear shifting is practically effortless and always super smooth. The top pulley stays a uniform distance from each cassette cog ensuring that every shift resonates with the plunk of exact gear engagement.
Shimano Dura-Ace 9100 11-Speed Front Derailleur
$184.99 - $189.99
- Lighter And Intuitive Shifting Operation - Natural Front Shift Lever Stroke - More Ergonomic Power Curve - New Link (Toggle) Construction - Precise & Easy Front Derailleur Set Up - More Cable Routing Options - Integrated Cable Tension Adjustment - Link (Toggle) Construction For No Need Of Tl-Fd90 And Turning Converter Assembling - Adjustable Cable Tension On The Front Derailleur - Adapted For Race Specific Frame Design - Available Wider Front Gear Pitch - Shorter Length Of Rear Center With O.L.D. 135mm - Largest Chainrings (2x): 46-55T - Chain Stay Angle: 61-66 - Chain Line: 43.5mm
Shimano Claris FD-R2030 Front Derailleur
$36.99 - $42.99
Claris R2000 series offers reliable functionality at a price point for new riders. Designed for easy rides around town with the durability to handle a long tour, Claris R2000 has a sporty design and promises the opportunity of comfortable and casual riding.
Shimano 105 Clamp-On Front Derailleur
$39.99 - $66.99
Shimano's 105 Clamp-On Front Derailleur sports a cold forged-aluminum body with Shimano's extra wide-pivot design for lightning-quick and super-smooth shifts. The steel cage ensures excellent durability.
SRAM GX 2x11 Front Derailleur (Low Direct-mount, Bottom-pull)
$56.99
SRAM's low-profile GX 2x11 Front Derailleur was designed specifically around SRAM's 2x11 X-GLIDE shifting. When used with SRAM's wide-range 11-speed cassette and a GX 2x11 rear derailleur, the GX 2x11 front derailleur provides one of the widest gear ranges possible, so no terrain is off limits. • Max ring (teeth): 38-tooth • Weight: 128 grams
SRAM EX1 X-Horizon Rear Derailleur
$218.99
The EX1 derailleur capitalizes on the robust build and precise shifting attributes of the X-HORIZON design, to create the world’s first derailleur specifically made for E-MTBs. Engineered to handle high-torque, low-cadence shifting across the 11-48 tooth E-Block cassette, the EX1 derailleur gives E-MTB riders clean, confident shifts, so they can spend more time enjoying the ride. - Proven SRAM X-HORIZON design that reduces shift force, ghost shifting and chain slap - 12-tooth X-SYNC pulley wheels - The EX1 derailleur is purpose built for E-MTB - Speeds: 1 x 8-speed - Weight: 289 grams - Color: Black - Outer Cage: Aluminum - Inner Cage: Aluminum - Bearings: Steel - Cage Size: Medium - Max Tooth: 48
SRAM X0 2x10 Front Derailleur (High Direct-mount, Dual-pull)
$104.99
SRAM's X0 Front Derailleur is made from cold-forged aluminum and chrome-plated steel for exceptional reliability and a race-worthy weight. It boast’s SRAM’s X-Glide technology for super-smooth and lightning-quick shifting even under load.
SRAM X0 2x10 Front Derailleur (Low Direct-mount, Bottom-pull)
$104.99
SRAM's X0 Front Derailleur is made from cold-forged aluminum and chrome-plated steel for exceptional reliability and a race-worthy weight. It boast’s SRAM’s X-Glide technology for super-smooth and lightning-quick shifting even under load.
Shimano 105 Braze-On Front Derailleur
$55.99
Shimano's 105 Braze-On Front Derailleur sports a cold forged-aluminum body with Shimano's extra wide-pivot design for lightning-quick and super-smooth shifts. The steel cage ensures excellent durability.
SRAM X0 10-Speed Rear Derailleur (Short-cage)
$346.99
SRAM's renowned X0 Rear Derailleur is a serious rider's and racer's dream. Expertly crafted from carbon and forged aluminum, the X0 is light enough to grace the winningest bikes out there. It's renowned for its precise, consistent function, efficient 1:1 actuation ratio and SRAM's Direct Route cable technology, all of which ensure that every single shift is crisp and lightning-fast. Plus, with sealed bearings, this sweet changer is built to last, too.
SRAM Ceramic Bearing Rear Derailleur Pulleys
$216.99
SRAM's Ceramic Bearing Rear Derailleur Pulleys run on super-smooth and efficient ceramic bearings so your drivetrain pedals with ease. They are also lighter than conventional pulleys. These fine pulleys even come with SRAM's ceramic-bearing grease in an easy-to-use 10ml syringe container.
SRAM X0 Type 2.1 Rear Derailleur
$359.99
From XC to enduro, SRAM's renowned X0 Type 2.1 Rear Derailleur is a rider's and racer's dream. Expertly crafted from carbon, titanium, and forged aluminum, the X0 is light enough to grace the fastest bikes out there. It's known for its precise, consistent function, efficient 1:1 exact actuation ratio and SRAM's Direct Route cable technology, all of which ensure that every single shift is crisp and lightning-fast. The roller bearing clutch keeps chain slap and derailleur bouncing at bay. Plus, with sealed bearings, this rear changer is built to last, too.
Shimano ZEE Shadow + Rear Derailleur
$109.99
Run silent, run deep. Shimano's ZEE rear derailleur uses a short cage and a Shadow profile to keep tucked out of the way of rocks, roots, whatever. The Plus part is a one-way clutch system that stabilizes the cage and your chain when ripping over rough terrain. Chain slap and the noise that goes with it, as well as dropped chains, are virtually eliminated. Of course, it still has the smooth action and sniper-like shifting that Shimano is rightly famous for. Freeriders and trail riders can run a typical MTB cassette like an 11-32, 11-34, or 11-36. And DHers can choose the close-ratio version and run a road cassette like 11-23, 11-25 or 11-28.
Shimano 105 FD-R7000 Front Derailleur
$60.99
The Shimano FD-R7000 11-speed front derailleur offers lighter front shifting with a natural stroke feel. The derailleur's cage design is optimized to perform with disc brake road bikes, while multiple cable routing options and integrated cable tension adjustment allow for precise setup and easy adjustments. As part of Shimano's 105 R7000 series, this front derailleur is ideal for beginner road cyclists, combining great value with trickle-down technology from Shimano's top-tier groups. - Cage is optimized for disc brake road bikes - Integrated cable tension adjustment for precise and easy adjustments - More frame cable routing options
Shimano Tourney TY-500 Rear Derailleur, Rivet Mount
$29.99
Shimano's Tourney long cage rear derailleur incorporates advanced Shimano functions and styling that sets the standard for entry level components. - TY model comes with resin bracket and plate body for reduced weight - Zinc-plated adjustment screws for corrosion resistance - MegaRange compatible - Includes frame hanger - Maximum cog size: 34t - Total capacity: 43t
Shimano Ultegra R8000 Front Derailleur
$83.99 - $99.99
Shimano Ultegra R8000 front derailleur. - Lighter front shifting operation - Link construction matches the force curve of the hand more naturally to reduce effort at the end of shifting - 100% perfect setting - New link construction allows for more flexible cable routing design - TL-FD68 and turning converter is not required in assembly - Easy and precise setting - Now possible to adjust cable tension on FD without specialized tools - Redesigned to fit wider gear pitch without sacrificing shifting performance - Shorter length of rear center (410mm) with O.L.D. 135mm - Model Number: FD-R8000-B - Series: Ultegra - Top Gear Teeth: 46-53T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Average Weight: 106 grams
SRAM Force eTap AXS Front Derailleur
$466.99
The SRAM Force eTap AXS front derailleur is AXS enabled for easy personalization. The redesigned derailleur offers better rear-tire clearance—for those that explore all roads—and works perfectly with all chainring combinations. No compromises; never miss a shift. - AXS enabled for easy personalization - Elegant and streamlined form for more rear-tire clearance - SRAM Yaw trimless cage technology with an optimized cage profile for new chainring combinations - Compatible with existing eTap batteries
SRAM GX 2x10 Front Derailleur (High Direct-mount, Top-pull)
$50.00
SRAM's low-profile GX 2x10 Front Derailleur was designed specifically around SRAM X-GLIDE shifting. This stiff, strong front derailleur provides, crisp, precise action for fast, smooth and reliable shifting season in and season out.
Shimano Sora SS9-Speed Rear Derailleur
$49.99
- Model Number: RD-R3000-SS - Series: SORA - Maximum Sprocket: 32T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Total Capacity: 37T
Shimano Ultegra R8000 Shadow Rear Derailleur
$139.99 - $159.99
Shimano Ultegra R8000 Shadow rear derailleur. - Sleek integrated appearance - Low-profile design - Race endurance - Optimized slant angle - Wide compatibility - Short cage covers: 11-25T to 11-30T - Medium cage covers: 11-28T to 11-34T - Model Number: RD-R8000 - Series: Ultegra - Maximum Sprocket: 30T - Minimum Sprocket: 11T - Maximum Front Difference: 16T - Average Weight: 200 grams (short cage type), 210 grams (medium cage type)
Shimano Tourney TX FD-TX800-TS3 Front Derailleur
$24.99
The Shimano Tourney TX800 front derailleur offers precise shifting with HYPERDRIVE technology for 3x7 and 3x8 speed drivetrains. - Action: Top Swing - Applicable Top-Mid tooth difference: 10T - Cable Route Type: Dual-Pull - Chain line: 47.5/50mm - Chainstay angle: 63-66° - Top gear teeth: 42T/48T - Total capacity: 20T
SRAM X3 7-/8-Speed Rear Derailleur
$39.99
SRAM's X3 Rear Derailleur is ready for adventure. Its composite and steel construction is tough, while SRAM's 1:1 actuation ratio and direct cable routing provide quick, reliable shifts. This derailleur is compatible with 7- or 8-speed drivetrains.
Shimano Deore XT Rear Derailleur
$179.99
• 11-speed DynaSys compatible • Light Shift Operation With 20% Less Effort • Improved chain stability • Efficient Shifting And Smoother Driving • New Shadow Design With Optimized Slant Angle • New Shift Cable With New Hyper Low-Friction Coating Technology • New Shadow Design With Optimized Slant Angle For Stable Gear Position • Easy-To-Adjust Chain Stabilizer • Efficient Pulley Teeth Design • Direct Mount compatible
Shimano Tiagra Front Derailleur
$65.99 - $69.99
Sleek, balanced and consistent. Shimano's Tiagra 4700 series front derailleur provides serious entry-level riding performance with trickle-down technology from the top shelf Dura Ace line. - Model Number: FD-4700 - Series: Tiagra - Cassette Compatibility: 10-speed - Top Gear Teeth: 53T - Maximum Capacity: 16T - Chain Stay Angle: 61-66 - Chain Line: 43.5 - Band Mount: 28.6 / 31.8 (w/AdapterS) 34.9
Shimano GRX RX810 11-Speed Rear Derailleur
$179.99
With an integrated chain stabilizer mechanism, the Shimano GRX derailleur provides a quieter experience while delivering shifting security and precision on mixed terrain. For rides on smooth surfaces, the derailleur features an ON/OFF switch for the chain stabilizer. The RD-RX810 rear derailleur is compatible with road cassettes with a max cog size of 34T. - Adjustable, gravel-tuned chain stabilizer prevents chain slapping and drops - Switch stabilizer ON/OFF to match the terrain - Silent and uninterrupted rear shifting on rough terrain - Low cog: Max. 34T/Min. 30T - High cog: Max. 11T/Min. 11T - Total capacity: 40T - Compatible with current road Dual Control Lever - Maximum front chainring range: 17T
Page 1 of 2 Next page